AllerGard™ ES NU-620 Containment Animal Transfer Station

The AllerGard™ ES (Energy Saver) model NU-620 is an Animal Transfer Station modeled after our Class II Biological Safety Cabinet design to offer maximum personnel, product, and environmental protection during sensitive cage changing procedures while maintaining mobility in the vivarium environment.

Part #: NU-620

Features

The AllerGard™ ES (Energy Saver) NU-620 Animal Transfer Station is modeled after the Class II Biological Safety Cabinet* design offering you the highest vivarium standard in the environmental, personnel and product protection for small animal cage changing procedures. Model NU-620 is an entirely mobile unit that can be outfitted with various ergonomic accessories to the meet the need of your facility's workflow.


Uncompromised Protection

Personnel Protection

NuAire cage changing stations focus on the safety and well-being of you, the lab technician. This is why we offer the AllerGard™ NU-620. It is put through rigorous testing, holding up against animal waste, hair, dander and more, protecting technicians during animal cage changes and transfers.


Dynamic Air BarrierNU-620 Dynamic Air Barrier

As a single sided unit the AllerGard™ NU-620 provides an active air barrier of 75 fpm (0.38 m/s) separating the laboratory environment from the work zone. Particles from the laboratory environment are intercepted, minimizing potentially contaminated air from entering the work area. You will experience improved allergen protection from particles such as hair and dander, via a vacuum system along the front grill.


Product Protection

Our commitment to safety drove us to test the AllerGard™ NU-620 using the same standards as those set for Biosafety Cabinetry, NSF/ANSI 49*. It was found that the AllerGard™ NU-620 not only meets but exceeds the stringent test standards established for product protection. Combining the air barrier located at the front of the cabinet and the laminar airflow moving across the work surface, your valuable lab animals are safe and protected.


Technology

AeroMax Electronic Control System

You can count on the AeroMax Electronic Control System to provide intuitive, easy-to-use features. The user interface is operated through LEDs and function keys, at the same time integrating essential sensors and monitoring features.


LED Lighting

Energy-efficient, bright LED lighting is standard with the NU-620. This helps eliminate eye strain and allows for better visualization of the product.


Performance

Low Noise Operation

Loud machinery can cause unneeded stress in both lab personnel and subject animals. This is one reason we have ensured that the NU-620 meets the low noise requirements as laid out by the NSF/ANSI 49 Biosafety Cabinet Standard.


Minimized Heat Build-up

Motor blower configuration and recirculated airflow can build-up heat within the work zone resulting in unintended stress to the laboratory animal and technician. A push/pull airflow design using a motor blower in the supply and an additional motor blower in the exhaust filter track minimizes any heat buildup by exhausting 100% of the airflow.


Accessibility and Ergonomics

Sizes That Meet Your Workflow

A workspace is only as good as its efficiency. Model NU-620 is offered in three different widths, nominal 3, 4, and 5-foot (0.9, 1.2, and 1.5 m). Robust metal construction ensures a long-lasting unit, while the heavy-duty casters and pull/push bars allow for ease of navigation throughout the lab.


Single Sided Verus Dual Sided Cabinet

The single-sided option offers unsurpassed technician protection, including allergen containment and ergonomic work surface configuration, while the dual-sided option allows for more than one user and greater workflow. The generous 14" (356 mm) access opening offers easy access to the unit. Standard available sizes include three, four and five-foot widths with options for custom work area depths.


Standard Features

  • AeroMax™ Electronic Control System
  • Ultra High Efficiency EC Supply Impeller
  • Ultra High Efficiency DC/ECM Exhaust Motor
  • Attenumont Vibration Control System
  • 3-inch (76 mm) Metal Frame Supply HEPA Filter 99.99% @ 0.3 microns
  • 3-inch (76 mm) Metal Frame Exhaust HEPA Filter 99.99% @ 0.3 microns
  • Washable/reuseable supply pre-filter
  • Washable/reuseable exhaust pre-filer
  • Metal Diffuser Over Supply Filter
  • 14-inch (356 mm) Hinged Window Sash Access Opening
  • LED Lighting
  • Light Timer
  • 4” (102 mm) Castors w/ Brakes
  • Two (2) Push/Pull Bars
  • Removable Prop Up Work Tray
  • Spill Trough with Waste Chute
  • One (1) Duplex Outlet Right Side Wall
  • Power Cord

Warranty

  • 3 Years Parts and Labor (United States and Canada)
  • 4 Years Parts (Global)

*The AllerGard™ NU-620 is NOT a substitute for a Class II Biological Safety Cabinet. The AllerGard™ NU-620 is NOT a containment device for airborne particulates in the low to moderate risk-hazard research as prescribed by the CDC/NIH in Microbiological and Biomedical Laboratories.


Specs

Electrical Configuration

Model Width
NU-620 (All Models) 115 Vac, 60 Hz

Configuration

Model Access Opening Style
NU-620-300 Dual Sided
NU-620-301 Single Side
NU-620-400 Dual Sided
NU-620-401 Single Side
NU-620-500 Dual Sided
NU-620-501 Single Side

Airflow Velocities

Model Inflow Downflow
NU-620-300 25 fpm (0.13 m/s) 60 fpm (0.30 m/s)
NU-620-301 75 fpm (0.38 m/s) 60 fpm (0.30 m/s)
NU-620-400 25 fpm (0.13 m/s) 60 fpm (0.30 m/s)
NU-620-401 75 fpm (0.38 m/s) 60 fpm (0.30 m/s)
NU-620-500 25 fpm (0.13 m/s) 60 fpm (0.30 m/s)
NU-620-501 75 fpm (0.38 m/s) 60 fpm (0.30 m/s)

Exterior Dimensions

Model Nominal Width Width* Depth Height
NU-620-300 3-foot (0.9-meter) 42 in. (1067 mm) 30 in. (762 mm) 80.5 in. (2045 mm)
NU-620-301 3-foot (0.9-meter) 42 in. (1067 mm) 30 in. (762 mm) 80.5 in. (2045 mm)
NU-620-400 4-foot (1.2-meter) 48 in. (1219 mm) 30 in. (762 mm) 80.5 in. (2045 mm)
NU-620-401 4-foot (1.2-meter) 48 in. (1219 mm) 30 in. (762 mm) 80.5 in. (2045 mm)
NU-620-500 5-foot (1.6-meter) 60 in. (1524 mm) 30 in. (762 mm) 80.5 in. (2045 mm)
NU-620-501 5-foot (1.6-meter) 60 in. (1524 mm) 30 in. (762 mm) 80.5 in. (2045 mm)
*Add 5 in (125 mm) overall for push/pull bars

Work Zone Dimensions

Model Width Depth Height
NU-620-300 36.375 in. (930 mm) 28.25 in. (718 mm) 26 in. (659 mm)
NU-620-301 36.375 in. (930 mm) 28.25 in. (718 mm) 26 in. (659 mm)
NU-620-400 45.375 in. (1083 mm) 28.25 in. (718 mm) 26 in. (659 mm)
NU-620-401 45.375 in. (1083 mm) 28.25 in. (718 mm) 26 in. (659 mm)
NU-620-500 54.375 in. (1387 mm) 28.25 in. (718 mm) 26 in. (659 mm)
NU-620-501 54.375 in. (1387 mm) 28.25 in. (718 mm) 26 in. (659 mm)

Height Range

Model Work Zone Exterior Cabinet
All Models 35.5 - 47.5 in. (902 - 1207 mm) 80.5 - 95.5 (2045 - 2426 mm)

Access Opening

Model Work Zone
All Models 14 in. (356 mm)

Options

Prefilter Options

Part NumberDescription
M375 Washable Dual Layer Pre-filter
M376 Disposable Pre-filter

Electrical Options

Part NumberDescription
E59 15 Amp Type B Outlet (3 amp max) (115V)
E02 GFI Type B Outlet (115V) (Right sidewall unless specified)
E112 Cord Reel (blue, brown, green/yellow wire)

Built-in Options

Part NumberDescription 
M403 Automated Liquid Hand Sanitizer (Liquid not included)  
M404 Automated Liquid Hand Sanitizer w/ Liquid  
M389 Foam Hand Sanitizer Dispenser and Foam  
M388 Foam Hand Sanitizer Dispenser (Foam not included)  
M366 Stainless Steel Folding Shelf [50 lbs. (23 kg) Max] NU-620 Folding Shelf 
M405 Base Shelf (Standing Option)  
M402 Free-Standing Cage Top Holder  
M401 Hinged Window with Magnifying Glass  

Castor Options

Part NumberDescription
M450 6-inch Castors, Station Height 82.375-inch (2092 mm)
M451 4-inch Castors, Station Height 80.5-inch (2045 mm)

Videos
Download Resources
Reviews

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register