Autoflow 4850
Water Jacket Humidified Co2 Incubator

Bookmark and Share

The Autoflow 4850 water jacketed humidified CO2 incubator virtually runs itself; controlling the temperature, CO2 level, and relative humidity. A 32-bit digitally accurate solid-state single gas analyzer utilizes a filter correlation technique for non-dispersive infrared analysis of CO2. The measurement of CO2 is independent of humidity and temperature variations within the chamber.

Autoflow 4850

Programmable Microcontroller Dependability

The US AutoFlow is run by a programmable microcontroller that samples input sensors, sets control outputs, makes corrections through the use of fuzzy logic, and displays status on the control panel. Ultra Smart (US) "Fuzzy Logic" provides quick, accurate, adaptive control of all the incubators parameters: chamber temperature, CO2, O2, humidity and door temperature. Fuzzy logic tolerates environmental changes and component variation. It continually adjusts and improves to provide a "living", exceptionally stable chamber environment.

Relative Humidity Display and Control

The US AutoFlow NU-4850 has a relative humidity display and control system. The system controls from ambient to 95% relative humidity. The recovery time to 95% ± 2% is typically less than 10 minutes. The accuracy is ± 3% from any given set point.

Clear and Complete Information

  • Chamber Temperature, set point and actual
  • CO2 Level, set point and actual
  • Output and Alarm Status
  • Water Jacket, low water level warning
  • Chamber Door Ajar
  • CO2 Infusion Status
  • Tank Status
  • System Alarm Condition Status
  • Humidity [model NU-4850], set point and actual

HEPA Filtration System

The US AutoFlow employs two separate capsule HEPA filters to minimize potential contamination problems within the chamber. After a door opening, the internal recirculation system will return the chamber to better than Class 100 air quality within 30 minutes.