| ID |
Title Expand All |
ATB0091
203.06KB |
DH-CO2 Automatic Tank Switch Installation Instructions
The Automatic CO2 Tank Switch (internal) has been designed to provide reliable service to perform the critical backup CO2 tank switch for the DH Autoflow incubator. The Tank Switch continuously monitors the selected tank. This bulletin describes how to install the automatic tank switch in NU-5500/E/G model incubators.
|
ATB0198
144.78KB |
INSTALLATION INSTRUCTIONS FOR DIVIDED GLASS DOORS
|
ATB0085
18.84KB |
NU-1590 CO2 Single Stage Regulator Installation Instructions
|
ATB0045
19.22KB |
Optional Feature (I11) Internal Coil for Chilled Water
The NuAire AUTOFLOW Series of water-jacketed CO2 incubators are available with an internal water-jacket cooling coil for ambient temperature or slightly below ambient temperature cell culture. This option for NuAire Incubators would have temperature capability to 18.0°C. The internal water-jacket cooling coil, when connected to a recirculating chilled water bath (customer supplied), will provide accurate temperature control to +0.1°C with uniformity being +0.2°C.
|
GTB0042
8.86KB |
EMC Directive (89/336/EEC)
|
GTB0098
18.91KB |
NU-4950/E/D/G N2 Gas Consumption
|
GTB0007
135.27KB |
NuAire Incubator Sterility Test
Incubator contamination is an inherent risk for all incubator manufacturers. Typical laboratories have thousands of airborne contaminants that may enter a tissue cell culture incubator during a door opening, and enter the perfect growth environment to survive and reproduce. This bulletin describes how to calculate inner chamber air sterility in a NuAire co2 incubator.
|