Fumegard 164
Bypass Fume Hood

Bookmark and Share

The FumeGard NU 164 Polypropylene Fume Hood is an excellent choice in a By-Pass Fume Hood for these compelling reasons:

  • NO RUST, NO Exposed metal
  • Ergonomic Design
  • 100% Polypropylene with seam welded construction. longer lasting, metal free
  • By-Pass designed to capture, contain and exhaust
  • Versatility of a Custom Hood and optional use of other thermoplastics so you get a Fume Hood built to your unique specifications
  • Superstructure is constructed from 1/2-inch Stress Relieved, All Seam Welded White Polypropylene
  • All Negative Pressure Interior
  • Air By-Pass feature promotes better uniform face velocity during window operations
  • Sealed Interior Fluorescent Lighting: 100 Foot-Candles (1076 LUX)
  • Electronic Fluorescent Lamp Ballast
  • Counterbalanced Sliding Lexan View Screen: 18" (457mm) maximum opening to fully closing
  • Flush Mounted Exterior/Interior Plumbing Chase Access Panels
  • Polypropylene Service Valves (except natural gas)
  • Connection Provision for venting a base cabinet
  • Removable Rear Baffle for maintenance
  • Reinforced 1/2-inch Thick Polypropylene Work Surface
  • Lower Work Access Opening Airfoil
  • PVC Electrical Junction Box
  • Modular Electrical Component Construction

Factory Options

  • Ground Fault Circuit Interrupter for duplex outlet(s)
  • Remote Controlled Service Valves for gas, air, vacuum available In brass, tin-lined
  • Brass, PVC, PVDF, Teflon or Polypropylene
  • Polypropylene, Teflon or PVDF Gooseneck Faucets
  • Additional Duplex Outlet(s) with PVC cover
  • Cascade or Single Rinse Tanks with/without Nitrogen purge
  • Air Flow Alarm Systems
  • Exhaust Interlocks for building controls
  • Base Support Stands
  • DI or N2 Teflon Spray Guns
  • Teflon, PVDF, Or Polypropylene Dip Tanks With/Without Drains
  • Polypropylene Or PVDF Sinks with Hot/Cold or DI Water Faucets
  • Teflon Liquid/Air Aspirators to syphon chemicals
  • Rear Exhaust Duct Wash-down System
  • PVDF Lined Interior
  • Composition Stone/Modified Epoxy Resin Work Surfaces
  • Flame Retardant Polypropylene Fume Hood
  • Front Slanted Control Panel
  • Polypropylene Exhaust Damper with Quadrant Lock
  • Custom Polypropylene Sinks with Chemically Resistant "P"-Trap
Join the laboratory professionals that have made NuAire ProGard Polypropylene Fume Hoods their choice for NO RUST performance, dependability and value.