Exhausting

Discovery the proper accessories needed when exhausting NuAire airflow products.

23 Item(s)

per page
  1. AireValv Manual Airtight Butterfly Valve 10" Diameter
    AireValv Manual Airtight Butterfly Valve 10" Diameter
    Manual Control The manual butterfly valve incorporates a lockable handle to open and close the valve. The heavy duty, PVC covered handle consists of a pointer to indicate percent open and setscrew to lock the damper in position. - 14 gauge, Type 304 Stainless Steel Construction - Triple layer valve plate construction - Vulcanized black silicone gasketing for reliability and long product life - Individually pressure tested - One end of the valve is enlarged opening to accommodate the nominal duct diameter making the installation easier Learn More
  2. AireValv Manual Airtight Butterfly Valve 12" Diameter
    AireValv Manual Airtight Butterfly Valve 12" Diameter
    Manual Control The manual butterfly valve incorporates a lockable handle to open and close the valve. The heavy duty, PVC covered handle consists of a pointer to indicate percent open and setscrew to lock the damper in position. - 14 gauge, Type 304 Stainless Steel Construction - Triple layer valve plate construction - Vulcanized black silicone gasketing for reliability and long product life - Individually pressure tested - One end of the valve is enlarged opening to accommodate the nominal duct diameter making the installation easier Learn More
  3. AireValv Manual Airtight Butterfly Valve 8" Diameter
    AireValv Manual Airtight Butterfly Valve 8" Diameter
    Manual Control The manual butterfly valve incorporates a lockable handle to open and close the valve. The heavy duty, PVC covered handle consists of a pointer to indicate percent open and setscrew to lock the damper in position. - 14 gauge, Type 304 Stainless Steel Construction - Triple layer valve plate construction - Vulcanized black silicone gasketing for reliability and long product life - Individually pressure tested - One end of the valve is enlarged opening to accommodate the nominal duct diameter making the installation easier Learn More
  4. AireValv Manual Butterfly Damper 6" Diameter
    AireValv Manual Butterfly Damper 6" Diameter
    Manual Control The manual butterfly valve incorporates a lockable handle to open and close the valve. The heavy duty, PVC covered handle consists of a pointer to indicate percent open and setscrew to lock the damper in position. - 14 gauge, Type 304 Stainless Steel Construction - Triple layer valve plate construction - Vulcanized black silicone gasketing for reliability and long product life - Individually pressure tested - One end of the valve is enlarged opening to accommodate the nominal duct diameter making the installation easier Learn More
  5. AireValv Motorized Butterfly Damper (NU-427, 430, 435 only)
    AireValv Motorized Butterfly Damper (NU-427, 430, 435 only)
    Motorized Control The automatic butterfly valve features the use of Belimo Actuators. Several varieties of Belimo® Actuators are available depending on the application. Consult NuAire engineering for assistance in choosing the correct butterfly valve and actuator. - 14 gauge, Type 304 Stainless Steel Construction - Triple layer valve plate construction - Vulcanized black silicone gasketing for reliability and long product life - Individually pressure tested - One end of the valve is enlarged opening to accommodate the nominal duct diameter making the installation easier Learn More
  6. Alnor AirGard BSC Airflow Monitor, 115V/60Hz
    Alnor AirGard BSC Airflow Monitor, 115V/60Hz

    The Alnor® AirGard® airflow monitor model NU-AIN-315BSC monitors the biological safety cabinet exhaust airflow performance providing a visual and audible alarm in case of loss of airflow.

    • Range 25-2,000 fpm (0.127-10.16 m/s)
    • Accuracy 1/2% of set point
    • Visual display green, yellow, and red LEDs
    • Alarm indications jumbo red LED, audible alarm, relay output
    • Input power 9-30 V AC/DC
    • Mounting flush or kit
    Learn More
  7. Alnor AirGard High and Low BSC Airflow Monitor
    Alnor AirGard High and Low BSC Airflow Monitor

    The Alnor® AirGard® airflow monitor model NU-AIN-350CEM monitors the biological safety cabinet exhaust airflow performance providing a visual and audible alarm in the event the cabinet increase or decreases airflow.

    • Range 25-2,000 fpm (0.127-10.16 m/s)
    • Accuracy 1/2% of set point
    • Visual display green, yellow, and red LEDs
    • Alarm indications jumbo red LED, audible alarm, relay output
    • input power 9-30 V AC/DC
    • Mounting flush or kit
    Learn More
  8. Alnor AirGard International BSC Airflow Monitor, 230V/50Hz
    Alnor AirGard International BSC Airflow Monitor, 230V/50Hz

    The Alnor® AirGard® airflow monitor model NU-AIN-I315BSC monitors the biological safety cabinet exhaust airflow performance providing a visual and audible alarm in case of loss of airflow.

    • Range 25-2,000 fpm (0.127-10.16 m/s)
    • Accuracy 1/2% of set point
    • Visual display green, yellow, and red LEDs
    • Alarm indications jumbo red LED, audible alarm, relay output
    • Input power 9-30 V AC/DC
    • Mounting flush or kit
    Learn More
  9. Damper Position End Switch (8", 10",12" Dampers only)
    Damper Position End Switch (8", 10",12" Dampers only)
    The Damper Position End Switch provides a contact on AirValv Butterfly Dampers to allow service technicians to manufacture and wire their own form of visual or audible system to inform users of the damper position. Learn More
  10. Digital Manometer Monitor 115V
    Digital Manometer Monitor 115V

    The Digital Manometer Monitor uses an integrated digital pressure transducer to monitor exhaust system negative pressure. The monitor indicates through both a segment display and LED's. The segment display is green and operates to + 0.01" w.g. sensitivity. The LED's indicate acceptable pressure (green), caution or near alarm points to within 0.005" w.g. (yellow) or alarm condition (red).

    IT IS RECOMMENDED THAT THE MONITOR BE CALIBRATED ANNUALLY.

    Learn More
  11. Digital Manometer Monitor 230V
    Digital Manometer Monitor 230V

    The Digital Manometer Monitor uses an integrated digital pressure transducer to monitor exhaust system negative pressure. The monitor indicates through both a segment display and LED's. The segment display is green and operates to + 0.01" w.g. sensitivity. The LED's indicate acceptable pressure (green), caution or near alarm points to within 0.005" w.g. (yellow) or alarm condition (red).

    IT IS RECOMMENDED THAT THE MONITOR BE CALIBRATED ANNUALLY.

    Learn More
  12. Fixed Range Transition
    Fixed Range Transition

    The NU-907 Fixed Range Exhaust Transition provides an air gap between the exhaust efflux of the BSC and the transition. The air gap essentially insulates the BSC from potential variations of airflow in the plant exhaust system, particularly if multiple BSC's are connected to the same exhaust blower system. NuAire's canopy employs a one-inch air-gap with a recommended minimum airflow through the gap of 175 LFPM (.89 m/s) nominally 200 LFPM (1.016 m/s). The characteristics of Canopy Transitions are as follows:

    • Preserves airflow balance within the BSC in a simple dependable manner.
    • Has a removable front service panel to permit exhaust HEPA filter integrity checks.
    • Simplifies exhaust system design.
    • Should be used with an adjustable exhaust system or damper to balance airflow and limit the loss of conditioned air from the room.
    • Provides a safety operational tolerance range for exhaust system fluctuations ranging from no exhaust to 15% above total CFM required (BSC exhaust CFM plus air gap CFM).

    • Compatible Models: NU-475 / 477 / 480 / 481


      Combine with NU-AIN-315BSC low flow exhaust monitor to comply with Standard NSF/ANSI 49.

    Learn More
  13. Fixed Range Transition
    Fixed Range Transition

    The NU-926/916 Fixed Range Exhaust Transition provides an air gap between the exhaust efflux of the BSC and the transition. The air gap essentially insulates the BSC from potential variations of airflow in the plant exhaust system, particularly if multiple BSC's are connected to the same exhaust blower system. NuAire's canopy employs a one-inch air-gap with a recommended minimum airflow through the gap of 175 LFPM (.89 m/s) nominally 200 LFPM (1.016 m/s). The characteristics of Canopy Transitions are as follows:

    • Preserves airflow balance within the BSC in a simple dependable manner.
    • Has a removable front service panel to permit exhaust HEPA filter integrity checks.
    • Simplifies exhaust system design.
    • Should be used with an adjustable exhaust system or damper to balance airflow and limit the loss of conditioned air from the room.
    • Provides a safety operational tolerance range for exhaust system fluctuations ranging from no exhaust to 15% above total CFM required (BSC exhaust CFM plus air gap CFM).

    • Compatible Models: NU-407 425 / 437 / 440 / 602 / 629


      Combine with NU-AIN-315BSC low flow exhaust monitor to comply with Standard NSF/ANSI 49.

    Learn More
  14. Flex Duct Kit 10" Diameter
    Flex Duct Kit 10" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  15. Flex Duct Kit 12" Diameter
    Flex Duct Kit 12" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  16. Flex Duct Kit 6" Diameter
    Flex Duct Kit 6" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  17. Flex Duct Kit 8" Diameter
    Flex Duct Kit 8" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  18. High/Low LED Bar Pressure Monitor 115V/60Hz
    High/Low LED Bar Pressure Monitor 115V/60Hz

    The FlowGard monitor connects to the positive pressure port on NuAire airflow products to monitor and alarm for high and low airflow.

    The FlowGard monitor uses a digital pressure transducer to monitor positive or negative pressure. The FlowGard monitor indicates through LED's normal operation (green), as well as high alarm status (red) and low alarm status (red).

    Compatible Models: NU-425 / 437 / 475 / 477 / 602 / 629 / 806 / 813 / 819 / 126

    Note: Cabinet or duct system must be new or have been decontaminated before installing the NU-956.

    Learn More
  19. High/Low LED Bar Pressure Monitor 230V
    High/Low LED Bar Pressure Monitor 230V

    The FlowGard monitor connects to the positive pressure port on NuAire airflow products to monitor and alarm for high and low airflow.

    The FlowGard monitor uses a digital pressure transducer to monitor positive or negative pressure. The FlowGard monitor indicates through LED's normal operation (green), as well as high alarm status (red) and low alarm status (red).

    Compatible Models: NU-425 / 437 / 475 / 477 / 602 / 629 / 806 / 813 / 819 / 126

    Note: Cabinet or duct system must be new or have been decontaminated before installing the NU-956.

    Learn More
  20. Low Fumehood Monitor - 115V/60Hz
    Low Fumehood Monitor - 115V/60Hz
    The Alnor® AirGard® airflow monitor model NU-AIN-200 monitors fume hood exhaust airflow performance providing a visual and audible alarm in case of loss of airflow. Learn More
  21. Round to Round Transition, Duct to Hood transition connection - 8" to 10"
    Round to Round Transition, Duct to Hood transition connection - 8" to 10"
    The round to round exhaust transition has an airtight construction that ensures exhausted air will not leak. The lightweight, galvanized steel prevents rust, and is very easy to install! - Galvanized steel prevents rust - Airtight Construction - Lightweight - Easy to install Learn More
  22. Silicone Connection Sleeve Kit for all Models
    Silicone Connection Sleeve Kit for all Models
    Easily connect exhaust transitions to ductwork. The Silicone Connection Sleeve Kit will reduce noise and help prevent possible environmental contamination. It easily connects from an exhaust transition to duct work and installs quickly! Kit Contains: - 60 x 6 in. (1524 x 152 mm) Silicone Rubber Sleeve - Two (2) Band Clamps - [1] Tube RV Sealant Learn More
  23. Variable Range Flow Exhaust Canopy for Class II, Type A2 Biosafety Cabinets (models 475, 477, 480, 481)
    Variable Range Flow Exhaust Canopy for Class II, Type A2 Biosafety Cabinets (models 475, 477, 480, 481)
    The Variable Flow Canopy for Class II, Type A2 Biological Safety Cabinets employs adjustable slide plates to vary slot height corresponding to the amount of room exhaust volume desired. Upon canopy low flow or loss of exhaust, the integrated airflow monitor will provide both an audible and visual alarm, and then energize a DC solenoid opens the front panel allowing the BSC inflow to be maintained at NSF recommended inflow velocities. - Preserves airflow balance within the BSC in a simple dependable manner. - Has a front service panel to permit exhaust HEPA filter integrity checks. - Simplifies exhaust system design. - Provides the adjustability for the amount of laboratory air exhausted whether more for general exhaust or to limit loss of conditioned air for greater energy efficiency. - Integrated audible and visual low exhaust alarm. - Provides a safety operational tolerance range for normal exhaust system fluctuations. - Models: NU-475, 477, 480, 481 Learn More

23 Item(s)

per page