Accessories

Laboratory Accessories are the essential tools needed to make a laboratory operate. NuAire Laboratory Accessories help in every facet of research and producing sterile product. Select from one of many NuAire accessories to customize your workflow.

76-100 of 128

per page
  1. Cryo-Gloves
    Cryo-Gloves

    Cryo-Gloves® provide comfortable, warm, and flexible protection for hands and arms when accessing your NuAire Ultra Low Temperature Freezer.

    • Size: Large
    • Mid Arm Length (14" - 15")
    • Machine Washable/Dryable
    Learn More
  2. Damper Position End Switch (8", 10",12" Dampers only)
    Damper Position End Switch (8", 10",12" Dampers only)
    The Damper Position End Switch provides a contact on AirValv Butterfly Dampers to allow service technicians to manufacture and wire their own form of visual or audible system to inform users of the damper position. Learn More
  3. Digital Manometer Monitor 115V
    Digital Manometer Monitor 115V

    The Digital Manometer Monitor uses an integrated digital pressure transducer to monitor exhaust system negative pressure. The monitor indicates through both a segment display and LED's. The segment display is green and operates to + 0.01" w.g. sensitivity. The LED's indicate acceptable pressure (green), caution or near alarm points to within 0.005" w.g. (yellow) or alarm condition (red).

    IT IS RECOMMENDED THAT THE MONITOR BE CALIBRATED ANNUALLY.

    Learn More
  4. Digital Manometer Monitor 230V
    Digital Manometer Monitor 230V

    The Digital Manometer Monitor uses an integrated digital pressure transducer to monitor exhaust system negative pressure. The monitor indicates through both a segment display and LED's. The segment display is green and operates to + 0.01" w.g. sensitivity. The LED's indicate acceptable pressure (green), caution or near alarm points to within 0.005" w.g. (yellow) or alarm condition (red).

    IT IS RECOMMENDED THAT THE MONITOR BE CALIBRATED ANNUALLY.

    Learn More
  5. Disposable Foam Armrest Pads - Package of 3
    Disposable Foam Armrest Pads - Package of 3

    NuAire disposable foam armrest pads help promote a healthy work environment by adding additional cushioning to the biological safety cabinet armrest.

    • Package of three (3)
    Learn More
  6. Elbow Rest (10")
    Elbow Rest (10")

    Promote a healthy working environment by improving forearm and elbow support while keeping arms off the front air grill of your NuAire Class II Biological Safety Cabinet. 

    Learn More
  7. Elbow Rest (5")
    Elbow Rest (5")
    Promote a healthy working environment by improving forearm support while keeping arms off the front grill of your NuAire Class II Biological Safety Cabinet. - Ergonomic Design of the elbow rest keeps your elevated above the front grill so airflows are not disrupted yet keeps your arms and shoulder in a comfortable position to perform your work. - Comfortable Close-Cell Sponge Padding. Does not absorb liquids. - Conveniently Placed on Front Air Grill of Biological Safety Cabinet. Fits all makes and models of Biological Safety Cabinets - Easy to clean. Autoclavable. - Rubber Feet Caps Included for Use on Flat Surfaces such as countertops Learn More
  8. Ergonomic Accessories Package
    Ergonomic Accessories Package
    Promote a healthy working environment with the NuAire ergonomic accessory package. Package includes: - Adjustable Footrest (SV-973-700) - Elbow Rest [10"] (NU-978-002) - Stainless Steel Turntable (NU-977-001) - Foam Armrest Pads - Package of 3 Learn More
  9. Feed Hopper Dual Chute
    Feed Hopper Dual Chute

    The feed hopper is constructed of high-grade stainless steel to provide a convenient way to store and distribute animal feed. The feed hopper is easily installed on either side of NuAire AllerGard Animal Transfer / Cage Changing Stations. A chute with shovel located on the both sides of the hopper allows easy access to transport food from the hopper to your sterile cage allowing multiple technicians to access food from both sides of the unit.

    Compatible Models: NU-612 / 617 / 619

    Learn More
  10. Feed Hopper Left Chute
    Feed Hopper Left Chute

    The feed hopper is constructed of high-grade stainless steel to provide a convenient way to store and distribute animal feed. The feed hopper is easily installed on either side of NuAire AllerGard Animal Transfer / Cage Changing Stations. A chute with shovel located on the left side of the hopper allows easy access to transport food from the hopper to your sterile cage.

    Compatible Models: NU-612 / 617 / 619

    Learn More
  11. Feed Hopper Right Chute
    Feed Hopper Right Chute

    The feed hopper is constructed of high-grade stainless steel to provide a convenient way to store and distribute animal feed. The feed hopper is easily installed on either side of NuAire AllerGard Animal Transfer / Cage Changing Stations. A chute with shovel located on the right side of the hopper allows easy access to transport food from the hopper to your sterile cage.

    Compatible Models: NU-612 / 617 / 619

    Learn More
  12. Fixed Range Transition
    Fixed Range Transition

    The NU-907 Fixed Range Exhaust Transition provides an air gap between the exhaust efflux of the BSC and the transition. The air gap essentially insulates the BSC from potential variations of airflow in the plant exhaust system, particularly if multiple BSC's are connected to the same exhaust blower system. NuAire's canopy employs a one-inch air-gap with a recommended minimum airflow through the gap of 175 LFPM (.89 m/s) nominally 200 LFPM (1.016 m/s). The characteristics of Canopy Transitions are as follows:

    • Preserves airflow balance within the BSC in a simple dependable manner.
    • Has a removable front service panel to permit exhaust HEPA filter integrity checks.
    • Simplifies exhaust system design.
    • Should be used with an adjustable exhaust system or damper to balance airflow and limit the loss of conditioned air from the room.
    • Provides a safety operational tolerance range for exhaust system fluctuations ranging from no exhaust to 15% above total CFM required (BSC exhaust CFM plus air gap CFM).

    • Compatible Models: NU-475 / 477 / 480 / 481


      Combine with NU-AIN-315BSC low flow exhaust monitor to comply with Standard NSF/ANSI 49.

    Learn More
  13. Fixed Range Transition
    Fixed Range Transition

    The NU-926/916 Fixed Range Exhaust Transition provides an air gap between the exhaust efflux of the BSC and the transition. The air gap essentially insulates the BSC from potential variations of airflow in the plant exhaust system, particularly if multiple BSC's are connected to the same exhaust blower system. NuAire's canopy employs a one-inch air-gap with a recommended minimum airflow through the gap of 175 LFPM (.89 m/s) nominally 200 LFPM (1.016 m/s). The characteristics of Canopy Transitions are as follows:

    • Preserves airflow balance within the BSC in a simple dependable manner.
    • Has a removable front service panel to permit exhaust HEPA filter integrity checks.
    • Simplifies exhaust system design.
    • Should be used with an adjustable exhaust system or damper to balance airflow and limit the loss of conditioned air from the room.
    • Provides a safety operational tolerance range for exhaust system fluctuations ranging from no exhaust to 15% above total CFM required (BSC exhaust CFM plus air gap CFM).

    • Compatible Models: NU-407 425 / 437 / 440 / 602 / 629


      Combine with NU-AIN-315BSC low flow exhaust monitor to comply with Standard NSF/ANSI 49.

    Learn More
  14. Flex Duct Kit 10" Diameter
    Flex Duct Kit 10" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  15. Flex Duct Kit 12" Diameter
    Flex Duct Kit 12" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  16. Flex Duct Kit 6" Diameter
    Flex Duct Kit 6" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  17. Flex Duct Kit 8" Diameter
    Flex Duct Kit 8" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  18. Foam Armrest Pads - Package Of 10
    Foam Armrest Pads - Package Of 10
    Promote a healthy working environment with disposable armrest pads. - Ten (10) 3/16" closed-cell foam will not absorb liquid - Self-stick adhesive tape - Easily removed and replaced Learn More
  19. High/Low LED Bar Pressure Monitor 115V/60Hz
    High/Low LED Bar Pressure Monitor 115V/60Hz

    The FlowGard monitor connects to the positive pressure port on NuAire airflow products to monitor and alarm for high and low airflow.

    The FlowGard monitor uses a digital pressure transducer to monitor positive or negative pressure. The FlowGard monitor indicates through LED's normal operation (green), as well as high alarm status (red) and low alarm status (red).

    Compatible Models: NU-425 / 437 / 475 / 477 / 602 / 629 / 806 / 813 / 819 / 126

    Note: Cabinet or duct system must be new or have been decontaminated before installing the NU-956.

    Learn More
  20. High/Low LED Bar Pressure Monitor 230V
    High/Low LED Bar Pressure Monitor 230V

    The FlowGard monitor connects to the positive pressure port on NuAire airflow products to monitor and alarm for high and low airflow.

    The FlowGard monitor uses a digital pressure transducer to monitor positive or negative pressure. The FlowGard monitor indicates through LED's normal operation (green), as well as high alarm status (red) and low alarm status (red).

    Compatible Models: NU-425 / 437 / 475 / 477 / 602 / 629 / 806 / 813 / 819 / 126

    Note: Cabinet or duct system must be new or have been decontaminated before installing the NU-956.

    Learn More
  21. Inventory Racks 20 x 2" (51 mm) Boxes with 81 cell Dividers Per Box
    Inventory Racks 20 x 2" (51 mm) Boxes with 81 cell Dividers Per Box

    The SV-HL-20-2-81 inventory rack comes pre-stocked with 20 x 2" (51 mm) cardboard freezer boxes with 81 cell dividers.

    Learn More
  22. IsoBar Surge Suppressor
    IsoBar Surge Suppressor
    • Stops Spikes and Interference Between Connected Equipment
    • Tough, Safe Metal Housing
    • Diagnostic Alarm System
    • 96,000 Spike Suppression
    • 6 Outlets
    Learn More
  23. Low Fumehood Monitor - 115V/60Hz
    Low Fumehood Monitor - 115V/60Hz
    The Alnor® AirGard® airflow monitor model NU-AIN-200 monitors fume hood exhaust airflow performance providing a visual and audible alarm in case of loss of airflow. Learn More
  24. Mini AlphaMop
    Mini AlphaMop
    The ITW Texwipe® AlphaMop™ Isolator Cleaning Tool is an autoclavable cleaning wand for laboraty equipment such as compounding isolators, biological safety cabinets, and laminar flow workstations. A swivel joint allows a user to clean hard to reach areas. A replaceable foam pad ensures that the mop cover conforms to the surfaces being cleaned. TX7101 includes two handles, 18" and 24", and is easily used with one hand. 1 mop/case, 2 handles (18" and 24"), 1 polyester foam pad, 6 AlphaWipe mop covers Learn More
  25. Mini AlphaMop
    Mini AlphaMop
    The Mop covers are made of the same material as ITW Texwipe's state-of-the-art polyester AlphaWipe® wipers, for effective cleaning and low contamination. Learn More

76-100 of 128

per page