Accessories

Laboratory Accessories are the essential tools needed to make a laboratory operate. NuAire Laboratory Accessories help in every facet of research and producing sterile product. Select from one of many NuAire accessories to customize your workflow.

101-125 of 170

per page
  1. Feed Hopper Left Chute
    Feed Hopper Left Chute

    The feed hopper is constructed of high-grade stainless steel to provide a convenient way to store and distribute animal feed. The feed hopper is easily installed on either side of NuAire AllerGard Animal Transfer / Cage Changing Stations. A chute with shovel located on the left side of the hopper allows easy access to transport food from the hopper to your sterile cage.

    Compatible Models: NU-612 / 617 / 619

    Learn More
  2. Feed Hopper Right Chute
    Feed Hopper Right Chute

    The feed hopper is constructed of high-grade stainless steel to provide a convenient way to store and distribute animal feed. The feed hopper is easily installed on either side of NuAire AllerGard Animal Transfer / Cage Changing Stations. A chute with shovel located on the right side of the hopper allows easy access to transport food from the hopper to your sterile cage.

    Compatible Models: NU-612 / 617 / 619

    Learn More
  3. Fixed Range Transition
    Fixed Range Transition

    The NU-907 Fixed Range Exhaust Transition provides an air gap between the exhaust efflux of the BSC and the transition. The air gap essentially insulates the BSC from potential variations of airflow in the plant exhaust system, particularly if multiple BSC's are connected to the same exhaust blower system. NuAire's canopy employs a one-inch air-gap with a recommended minimum airflow through the gap of 175 LFPM (.89 m/s) nominally 200 LFPM (1.016 m/s). The characteristics of Canopy Transitions are as follows:

    • Preserves airflow balance within the BSC in a simple dependable manner.
    • Has a removable front service panel to permit exhaust HEPA filter integrity checks.
    • Simplifies exhaust system design.
    • Should be used with an adjustable exhaust system or damper to balance airflow and limit the loss of conditioned air from the room.
    • Provides a safety operational tolerance range for exhaust system fluctuations ranging from no exhaust to 15% above total CFM required (BSC exhaust CFM plus air gap CFM).

    • Compatible Models: NU-475 / 477 / 480 / 481


      Combine with NU-AIN-315BSC low flow exhaust monitor to comply with Standard NSF/ANSI 49.

    Learn More
  4. Fixed Range Transition
    Fixed Range Transition

    The NU-926/916 Fixed Range Exhaust Transition provides an air gap between the exhaust efflux of the BSC and the transition. The air gap essentially insulates the BSC from potential variations of airflow in the plant exhaust system, particularly if multiple BSC's are connected to the same exhaust blower system. NuAire's canopy employs a one-inch air-gap with a recommended minimum airflow through the gap of 175 LFPM (.89 m/s) nominally 200 LFPM (1.016 m/s). The characteristics of Canopy Transitions are as follows:

    • Preserves airflow balance within the BSC in a simple dependable manner.
    • Has a removable front service panel to permit exhaust HEPA filter integrity checks.
    • Simplifies exhaust system design.
    • Should be used with an adjustable exhaust system or damper to balance airflow and limit the loss of conditioned air from the room.
    • Provides a safety operational tolerance range for exhaust system fluctuations ranging from no exhaust to 15% above total CFM required (BSC exhaust CFM plus air gap CFM).

    • Compatible Models: NU-407 425 / 437 / 440 / 602 / 629


      Combine with NU-AIN-315BSC low flow exhaust monitor to comply with Standard NSF/ANSI 49.

    Learn More
  5. Flex Duct Kit 10" Diameter
    Flex Duct Kit 10" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  6. Flex Duct Kit 12" Diameter
    Flex Duct Kit 12" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  7. Flex Duct Kit 6" Diameter
    Flex Duct Kit 6" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  8. Flex Duct Kit 8" Diameter
    Flex Duct Kit 8" Diameter

    Flex duct to connect exhaust systems to NuAire Airflow Products providing flexibility when used with adjustable base stands.

    - 8 ft. (2.5 m) of Flex Duct
    - Two (2) Stainless Steel Band Clamps

    Learn More
  9. Foam Armrest Pads - Package Of 10
    Foam Armrest Pads - Package Of 10
    Promote a healthy working environment with disposable armrest pads. - Ten (10) 3/16" closed-cell foam will not absorb liquid - Self-stick adhesive tape - Easily removed and replaced Learn More
  10. High/Low LED Bar Pressure Monitor 115V/60Hz
    High/Low LED Bar Pressure Monitor 115V/60Hz

    The FlowGard monitor connects to the positive pressure port on NuAire airflow products to monitor and alarm for high and low airflow.

    The FlowGard monitor uses a digital pressure transducer to monitor positive or negative pressure. The FlowGard monitor indicates through LED's normal operation (green), as well as high alarm status (red) and low alarm status (red).

    Compatible Models: NU-425 / 437 / 475 / 477 / 602 / 629 / 806 / 813 / 819 / 126

    Note: Cabinet or duct system must be new or have been decontaminated before installing the NU-956.

    Learn More
  11. High/Low LED Bar Pressure Monitor 230V
    High/Low LED Bar Pressure Monitor 230V

    The FlowGard monitor connects to the positive pressure port on NuAire airflow products to monitor and alarm for high and low airflow.

    The FlowGard monitor uses a digital pressure transducer to monitor positive or negative pressure. The FlowGard monitor indicates through LED's normal operation (green), as well as high alarm status (red) and low alarm status (red).

    Compatible Models: NU-425 / 437 / 475 / 477 / 602 / 629 / 806 / 813 / 819 / 126

    Note: Cabinet or duct system must be new or have been decontaminated before installing the NU-956.

    Learn More
  12. Insert 11x15 ml Conical Tubes (Set of 4)
    Insert 11x15 ml Conical Tubes (Set of 4)

    Part number NU-2T15C is an 11 x 15 ml conical tube insert that comes as a set of 4, compatible with round bucket part number NU-B500.

    Learn More
  13. Insert 12x10 ml Collection Tube (Set of 4)
    Insert 12x10 ml Collection Tube (Set of 4)

    Part number NU-1T10 is a 12x10 ml collection tube insert that comes as a set of 4, compatible with round bucket part number NU-B250.

    Learn More
  14. Insert 15x5 ml Collection Tube (Set of 4)
    Insert 15x5 ml Collection Tube (Set of 4)

    Part number NU-1T5 is a 15 x 5 ml collection tube insert that comes as a set of 4, compatible with round bucket part number NU-B250.

    Learn More
  15. Insert 19x10 ml Collection Tube (Set of 4)
    Insert 19x10 ml Collection Tube (Set of 4)

    Part number NU-2T10 is a 19 x 10 ml collection tube insert that comes as a set of 4, compatible with round bucket part number NU-B500.

    Learn More
  16. Insert 1x100 ml Round Bottle (Set of 4)
    Insert 1x100 ml Round Bottle (Set of 4)

    Part number NU-2T100 is a 1 x 100 ml round bottom bottle insert that comes as a set of 4, compatible with round bucket part number NU-B500.

    Learn More
  17. Insert 1x100 ml Round Bottle (Set of 4)
    Insert 1x100 ml Round Bottle (Set of 4)

    Part number NU-1T100 is a 1x100 ml round bottom bottle insert that comes as a set of 4, compatible with round bucket part number NU-B250.

    Learn More
  18. Insert 1x200 ml Round Bottle (Set of 4)
    Insert 1x200 ml Round Bottle (Set of 4)

    Part number NU-2T200 is a 1 x 200 ml conical tube insert that comes as a set of 4 that can be used with 175ml and 225ml bottles, compatible with round bucket part number NU-B500.

    Learn More
  19. Insert 1x200 ml Round Bottle (Set of 4)
    Insert 1x200 ml Round Bottle (Set of 4)

    Part number NU-1T200 is a 1x200 ml conical tube insert that comes as a set of 4 that can be used with 175ml and 225ml bottles, compatible with round bucket part number NU-B250.

    Learn More
  20. Insert 1x625 ml Flat Bottom Bottle (Set of 4)
    Insert 1x625 ml Flat Bottom Bottle (Set of 4)

    Part number NU-2T625 is a 625ml bottle that comes as a set of 4 that fits directly into rotor bucket NU-B500 but cannot be used with bio-containment lids NU-L500.

    Learn More
  21. Insert 23x5 ml Collection Tubes (Set of 4)
    Insert 23x5 ml Collection Tubes (Set of 4)

    Part number NU-2T5 is a 23 x 5 ml collection tube insert that come as a set of 4, compatible with round bucket part number NU-B500.

    Learn More
  22. Insert 3x50 ml Conical Tube (Set of 4)
    Insert 3x50 ml Conical Tube (Set of 4)

    Part number NU-1T50CL is a 3 x 50 ml conical tube insert that comes as a set of 4 that can be used with Bio-containment lids NU-L250, compatible with round bucket part number NU-B250.

    Learn More
  23. Insert 3x50 ml Self-standing Tube (Set of 4)
    Insert 3x50 ml Self-standing Tube (Set of 4)

    Part number NU-1T50SL is a 3 x 50 ml self-standing conical tube insert that comes as a set of 4 that can be used with Bio-containment lids NU-L250, compatible with round bucket part number NU-B250.

    Learn More
  24. Insert 4x50 ml Conical Tube (Set of 4)
    Insert 4x50 ml Conical Tube (Set of 4)

    Part number NU-1T50C is a 4 x 50 ml conical tube insert that comes as a set of 4 that maximizes space for a larger capacity but cannot be used with bio-containment lids NU-L250, compatible with round bucket part number NU-B250.

    Learn More
  25. Insert 4x50 ml Conical Tube (Set of 4)
    Insert 4x50 ml Conical Tube (Set of 4)

    Part number NU-2T50CL is a 4 x 50 ml conical tube insert that comes as a set of 4 that can be used with Bio-containment lids NU-B500, compatible with round bucket part number NU-B500.

    Learn More

101-125 of 170

per page