Oxygen Control System
The O2 control system uses a fuel cell oxygen sensor to constantly monitor, control, and display oxygen levels from 21% down to 2% with accurate chamber readings and rapid recovery times.
The RH control system uses a solid state capacitance humidity sensor to monitor, control, and display humidity by injecting heated water vapor to your setpoint from a reservoir outside the chamber giving the operator control over the amount of humidity from below ambient to 95%.
Closed Loop HEPA Filtration
Limits the need for moving parts minimizing vibration. An air pump injects filtered air into the work chamber. The air recirculates through sensor checkpoints before it is re-injected into the work chamber passing through a 99.99% HEPA filter. This system slows air movement to one chamber air change every 30 minutes. The decelerated air movement ensures ISO class 5 air conditions to minimize cell desiccation by airflow.
NuAire Incubator Control Electronics (NICE) is a state-of-the-art microcomputer based control system specifically designed to service the precise control requirements of the chambers environment, providing optimum programmable conditions for culture growth.
Constant Contamination Control
A unique HEPA filtration system filters fresh air into the pump, CO2 gas from tanks or house systems, IR CO2 sensor sample air returning to the change, air between air pump and inner chamber, while continuously filtering the internal chamber to create ISO Class 5 air quality.
Cleanroom within a Cleanroom
Interior chamber is constantly maintained at positive pressure similar to an ISO Class 5 Cleanroom.
Sensitivity and Accuracy of Gas Control
Infrared (IR) CO2 sensor provides stable outputs requiring less calibrations.
Precision of Electronic Microprocessor Controls
A programmable microcontroller samples input sensors, sets control outputs, and makes necessary corrections to the chamber environments resulting in quick and responsive recovery times.
Reliability and Protection of Automated and Redundant Back-up Systems
Dual temperature sensor probes, solid-state analyzers, HEPA filtration systems, and status alarms create a dependable, long lasting scientific instrument.
Critical Cleaning Components
Coved corners prevent contaminants from becoming trapped in the chamber. Removable shelves, brackets, and gasket make cleaning simple by cleaning around them or placing them in the autoclave.
All 6 sides of the chambers walls feature heating elements surrounded by R5 insulation to provide optimum temperature uniformity in the work chamber.
- 100% Stainless Steel Interior
- 4 Removable Stainless Steel Shelves
- 20 Gallon (75.7 L) Water Jacket
- Remote Alarm Output Contacts
- CO2 Sample Port
- Adjustable Leg Levelers
- Access Port
- Antibacterial Copper Enriched Shelves
- Internal Tank Switch
- RS-232 Communications Interface
- Multi-Signal Analog Outputs
- Additional Shelves
- Cooling Coil
- 4 Segmented Inner Lexan Doors
- Right Door Swing
- Water Pan
|Chamber Volume||6.65 ft.3 / 188 L|
|Exterior Dimensions (W x D x H)
|31 x 25 ½ x 34 (787 x 648 x 864)|
|Chamber Dimensions (W x D x H)
|21 ½ x 21 x 25 ½ (546 x 533 x 648)|
|Weight||222 lbs. / 101 kg.|
|Temperature Control System|
|Range||18°C to 55°C|
|Uniformity||± 0.2°C at 37°C|
|CO2 Control System|
|Range||0.1 to 20%|
|Recovery||5.0% ± 2.0% in 3 minutes 30 seconds|
|Display Resolution||± 0.1%|
|Humidity Control System|
|Range||5 % above ambient to 95 %|
|Accuracy||± 3.0 %|
|Recovery||95 % ± 3.0 % within 10 minutes|
|Oxygen Control System|
|Range||2 to 21 %|
|Accuracy||± 1.0 %|
|Recovery||5.0 % ± 2.0 % within 10 minutes|
|Warranty||2 Year Parts and Labor (US & CA)|
|3 Year Parts (Intl)|
|Accolades||UL, UL-C, CE, Energy Saver, RoHS, Constant Contamination Control, Critical Cleaning Components|
|Please note specifications are subject to change. Please contact NuAire to verify before purchase.|