FumeGard NU-156 Vertical Laminar Flow Wet Process Polypropylene Fume Hood
The NU 156 is the first choice in a Vertical Laminar Flow Wet Process Fume Hood for High Acid use:
- 100% Poly-Pro seam welded construction
- longer lasting, metal free construction
- Ergonomic Design large work space, clear view
- Personnel and Product Protection with 100% clean air HEPA filtration and true Laminar Air Flow
- Flexible Design and optional use of other thermoplastics so you get a Fume Hood built to your unique specifications
Features
- HEPEXTM Zero Leak Air Flow System
- Large HEPA Filters: 99.99% Efficient On 0.3 Microns
- Separatorless HEPA Filter Media (i.e. NO Aluminum Separators)
- Totally Polypropylene Enclosed with Lexan Cover external fluorescent Lighting: 100
- Foot-Candles (1076 LUX)
- Totally Polypropylene Enclosed Electronic Low-Heat Fluorescent Ballast
- Front Filter Removal, WITHOUT Removing View Screen
- Sliding Lexan View Screen: 19 1/2" (495mm) Maximum Opening to Fully Closing
- Standard 10-inch (254mm) Access Opening at 105 LFPM
- Removable Work Surface/Inlet Grill
- PVC Diffuser Over Supply HEPA (in lieu of metal)
- 1/4-inch (6 mm) Lexan With Marguard View Screen
- PVC View Screen Wiper
- PVC Encased Window Counter Balance with Polypropylene Ropes and Pulleys
- A Vented and Plumbed Spill Trough Plenum under work surface
- 1/2-inch Polypropylene Blower/HEPA Filter Module
- Backward Inclined Plastic Impeller
- 1/2-inch Stress Relieved All Seam Welded Polypropylene Work Zone
- Flush Mounted Interior/Exterior Access Panels
- Modular Electrical Component Construction Sealed In Polypropylene Case with Access Panel
- Polypropylene Control Center Plate
- Solid State Motor Voltage Regulator
Factory Options
- Ground Fault Circuit Interrupter for Duplex Outlet
- Remote Controlled Service Valves For Air, Vacuum, and/or N2 available In PVC, PVDF
- Teflon or Polypropylene*
- Additional Duplex Outlet(s) with PVC Covers
- Magnehelic Gauge to Monitor Supply Plenum Housed In a Polypropylene Housing with Lexan window
- Cascade Rinse Tanks with Nitrogen purge
- Digital Manometer / alarm
- Exhaust Interlocks for building controls
- Vented Base Support Stands
- DI or N2 Teflon Spray Guns
- Teflon, PVDF, or Polypropylene Dip Tanks with or without drains
- Polypropylene or PVDF sinks with Hot/Cold or DI Water Faucets
- Teflon Liquid/Air Aspirators to syphon chemicals
- ULPA Filters: 99.999% Efficient On 0.12 Micron Particles
- Fully Perforated Work Surface (10% Open)
- Polypropylene Rectangle-to-Round Exhaust Transitions
- Custom Polypropylene Sinks with Chemically Resistant "P"-Trap
Join the laboratory professionals that have made the NU 156 the first choice in a Bench Model Vertical Laminar Flow Wet Process Fume Hood for High Acid use, and put the finest in the world to work for you: NuAire. Contact NuAire Today for more information or to get purchase specifications!
*Metallic Pipe, required for natural gas,or any other metallic surface, Is coated with a 20-mil thickness of thermoplastic powder PolyArmor
