[Spec] Class II, Type B2 Biosafety Cabinet NU-430 Specification (115V)

August 31, 2016

Share this Flipbook
Facebook
Twitter
Email
LinkedIn

LabGard model NU-430 is an NSF/ANSI 49 listed Total Exhaust Class II, Type B2 Biological Safety Cabinet (BSC) providing optimum control over product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk-hazard research and drug preparation or product operations.

Previous Flipbook

[Spec] NU-545 Class II, Type A2 Biosafety Cabinet (115V)

Product specifications for LabGard AIR Limited Class II, Type A2 Biosafety Cabinet (BSC) model NU-545.

Next Flipbook

[Spec] Class II, Type B1 Biosafety Cabinet Model NU-427 Specification (115V)

View specifications for NSF/ANSI 49 listed LabGard Model NU-427 Class II, Type B1 Biosafety Cabinet.

Shop Biosafety Cabinets

View Now

Other content in this Stream

0:30

[Video] Class II Biosafety Cabinet Airflow Demo with Smoke

[Spec] Class II, Type B2 Biosafety Cabinet NU-430 Specification (115V)

Previous Flipbook

Next Flipbook

Other content in this Stream

<p>Watch how the airflow in a Class II Biosafety Cabinet (BSC) offers personnel and product protection with the use of smoke.</p>

Watch and learn more about LabGard Biosafety Cabinet model NU-540.

Learn 10 working safely tips when working in a biosafety cabinet.

Product brochure for LabGard ES (Energy Saver) CYTO Class II, Type A2 Biosafety Cabinet model NU-581 featuring a three tired filtration system for use with Cytotoxics, Hazardous Drugs, & API Powders.

The LabGard NU-500 Series Class II Biosafety Cabinets from NuAire provide you the very best in design, ergonomics, and technology.

Minimize workplace injuries working the comfort of a LabGard Biosafety Cabinet.

Work in a safer environment with NuAire electronics monitoring and controlling your work environment.

NuAire Class II Biological Safety Cabinets are designed as a monolithic unit. This means the shell of the cabinet is manufactured by welding sheets of heavy gauge stainless steel together to create a

Feel at ease working in a longer-lasting safer environment.

Proper preventative maintenance, yearly maintenance, and certification are needed to maximize your products life as well as keep up to date with industry standards to eliminate safety hazards.

After work has been completed proper protocols must be followed to decontaminate the biosafety cabinet to avoid potential contamination risks.

An important part of a safe work environment is making sure it is ergonomically designed to work with you, not against you.

Proper technique when working within the BSC will minimize air turbulence and prevent splatter or unwanted spread of aerosols.

The use of proper procedures in the Biosafety Cabinet (BSC) cannot be overemphasized in providing primary personnel and environmental protection.

Learn steps to take before you begin work in your Biological Safety Cabinet. A proper biosafety or operations manuals will specify practices and procedures designed to minimize and eliminate risks.

Biosafety Cabinets (BSCs) a are designed to remove or minimize exposures to hazardous biological materials and particulates.

Learn the basics of how NuAire Biological Safety Cabinets are designed to offer optimal personnel, environmental and product protection.

Learn some of the basic about biosafety cabinets (BSC) and how to go about selecting the right bsc for your application.

Product cut sheet of LabGard ES AIR nominal 6-foot (1.8-meter) Microbiological Safety Cabinet (MSC) model NU-543-600E.

Product drawing of 230-Volt LabGard AIR model NU-543-500E Class II Microbiological Safety Cabinet (MSC).