[Infographic] 10 Tips for Working Safely in the laboratory with Your Biosafety Cabinet
Good technique when working within a Class II Biosafety Cabinet will minimize air turbulence and prevent splatter or unwanted spread of aerosols.
[Video] Chapter 1: Introduction to Biosafety Cabinets
Learn the basics of how NuAire Biological Safety Cabinets are designed to offer optimal personnel, environmental and product protection.
[Video] Chapter 2: Understanding the Biosafety Cabinet
Biosafety Cabinets (BSCs) a are designed to remove or minimize exposures to hazardous biological materials and particulates.
[Video] Chapter 3: Proper Preparation - The 4 Steps to Take Before You Begin Work in Your Biosafety Cabinet
Learn steps to take before you begin work in your Biological Safety Cabinet. A proper biosafety or operations manuals will specify practices and procedures designed to minimize and eliminate risks.
[Video] Chapter 4: Using Proper Procedures and Techniques with the Biosafety Cabinet
The use of proper procedures in the Biosafety Cabinet (BSC) cannot be overemphasized in providing primary personnel and environmental protection.
[Video] Chapter 5: Working in your Biosafety Cabinet
Proper technique when working within the BSC will minimize air turbulence and prevent splatter or unwanted spread of aerosols.
[Video] Chapter 5a: Biosafety Cabinet Ergonomics
An important part of a safe work environment is making sure it is ergonomically designed to work with you, not against you.
[Video] Chapter 6: When Work is Completed in the Biosafety Cabinet
After work has been completed proper protocols must be followed to decontaminate the biosafety cabinet to avoid potential contamination risks.
[Video] Chapter 7: Maintenance and Certification of a Biosafety Cabinet
Proper preventative maintenance, yearly maintenance, and certification are needed to maximize your products life as well as keep up to date with industry standards to eliminate safety hazards.
[White Paper] CO2 Incubator: Proper Use and Preventative Maintenance
This guide will help lab managers understand risks and best practices as they develop training for CO2 incubator users and establish a preventive maintenance program and setup criteria.
[Video] Class II Biosafety Cabinet Airflow Demo with Smoke
<p>Watch how the airflow in a Class II Biosafety Cabinet (BSC) offers personnel and product protection with the use of smoke.</p>
[Video] My Green Lab
My Green Lab is fundamentally and permanently improving the sustainability of scientific research.
[Video] Biosafety Cabinet Construction Matters
NuAire Class II Biological Safety Cabinets are designed as a monolithic unit. This means the shell of the cabinet is manufactured by welding sheets of heavy gauge stainless steel together to create a
[Infographic] 10 Tips for Working Safely in the Pharmacy with Your Biosafety Cabinet
Ten tips to help you use the proper aseptic technique when working within a Class II Biosafety Cabinet (BSC) to minimize air turbulence and prevent the spread of aerosols.
[Infographic] Biosafety Cabinet Ergonomic Tips
Working in a Biological Safety Cabinet (BSC) is tedious work, read these ergonomic tips for working in your biosafety cabinet.
[White Paper] How to Maximize Centrifuge Performance
Proper use and care on a daily basis remain critical to maximize performance and extend the service life of a laboratory centrifuge.
[Infographic] 5 Biosafety Cabinet Reminders
We asked NIH National Biosafety and Biocontainment Fellows what some of the most common mistakes made when working with a Biosafety Cabinet.
[Infographic] Hazardous Drug Biosafety Cabinet Operating Procedure
When working in your biosafety cabinet with hazardous drugs it is important to learn the proper procedure from beginning to end.
[White Paper] Ultralow Freezer: Proper Use and Preventative Maintenance
Eight critical preventive maintenance tips for Minus 80 Ultralow Temperature (ULT) Freezers.
[Presentation] Tips for Working Safely in your Biosafety Cabinet
Learn a few tips about how to work safely in your Biosafety Cabinet (BSC).