NuAire products manufactured from Polypropylene materials require special consideration for the care and use to assure maximum customer satisfaction. Polypropylene materials have many favorable characteristics, such as being resistant to many chemicals, rigid, durable, and available in many thicknesses. NuAire fabricates the Polypropylene materials in many different ways to produce a variety of products for the laboratory. Understanding about the care and use of the Polypropylene material is important.
Most Recent Flipbooks
[Service Bulletin] Support and Product Replacement Policy
[Service Bulletin] CO2 Incubator Preventative Maintenance
[Service Bulletin] Ultralow Freezer Preventative Maintenance
[Bulletin] Care and Use of Copper Surfaces
NuAire lab products manufactured with copper such as CO2 Incubators have specific care and use instructions to assure maximum customer satisfaction.
[Bulletin] Horizontal Airflow Fixed (OSHPD) Seismic Anchorage Calculations/Installation
[Bulletin] Biosafety Cabinet Seismic Anchorage Calculations & Installation
[Bulletin] NU-959 UV Light Operation and Installation Instructions
[Bulletin] Single Stage CO2 Regulator NU-1590 Installation Instructions
[Bulletin] NU-C200V Bench Top Centrifuge Performance Evaluation
[Bulletin] Clarifying the Class II, Type C1 Biosafety Cabinet
The Class II, Type C1 Biosafety Cabinet (BSC) is similar to a Type B1 regarding airflow pattern. The Type C1 has a portion of the work surface to exhaust air.
[Bulletin] NuAire Laboratory Equipment Electrical Safety
This technical bulletin is intended review both UL and NFPA requirements and clarifies the requirements for non-patient care laboratyr and pharmacy equipment.
[Bulletin] Volatile Contaminant Air Concentrations in Type B Biosafety Cabinets
Use of volatiles in Class II, Type B Biosafety Cabinets (BSCs).
[Bulletin] Camera Usage in a Biosafety Cabinet and Pharmacy Isolator
NuAire offers general guidance to aid in the selection of camera systems that can be mounted on or near your primary engineering controls.
[Bulletin] Impact of Class II Biosafety Cabinet Downflow Velocity on Cross Contamination
The result of lower Biosafety Cabinet downflow velocities result in a higher level of sample cross-contamination using traditional work practice guidelines.
[Bulletin] NU-S125 Performance Evaluation
[Bulletin] NU-480 Decontamination by Vaporized Hydrogen Peroxide
[Bulletin] NU-480-600E Decontamination Process Testing Results
[Bulletin] Concurrent Balance Value of Class II, Type B1/B2 Biosafety Cabinets
The field certification of Biosafety Cabinets (BSC’s) as required in Annex F of the NSF/ANSI 49 class II biosafety cabinetry standard is based on the principle of replication.
[Bulletin] Movement and Re-Certification of a Biosafety Cabinet
[Bulletin] NU-NTE797 Main Chamber Pressure Specification Change