[Spec] Class II, Type B1 Biosafety Cabinet Model NU-427 Specification (115V)

August 31, 2016

LabGard model NU-427 is a NSF/ANSI 49 Listed Class II, Type B1 Biological Safety Cabinet (BSC) providing personnel, product, and environmental protection. Personnel protection is created through an air barrier at the front of the cabinet. Product protection is created through HEPA filtered laminar airflow over the work surface. Environmental protection is produced by HEPA filtering exhausted air before entering a facilities exhaust system. LabGard model NU-427 recirculates 30% and exhausts 70% of air. Model NU-427 must be ducted to a dedicated facility exhaust system.

Previous Flipbook

[Spec] Class II, Type B2 Biosafety Cabinet NU-430 Specification (115V)

LabGard model NU-430 Class II, Type B2 Total Exhaust Biosafety Cabinet specification.

Next Flipbook

[Brochure] LabGard AIR NU-543 Class II, Type A2 Biosafety Cabinet

LabGard AIR Model NU-543 Class II, Type A2 Biosafety Cabinet provides long lasting personnel, product, and ...

[Spec] Class II, Type B1 Biosafety Cabinet Model NU-427 Specification (115V)

Previous Flipbook

Next Flipbook

Other content in this Stream

Product specifications for LabGard Class II, Type A2 Biosafety Cabinet (BSC) model NU-540 115-volt from NuAire Laboratory Equipment.

LabGard model NU-430 Class II, Type B2 Total Exhaust Biosafety Cabinet specification.

LabGard AIR Model NU-543 Class II, Type A2 Biosafety Cabinet provides long lasting personnel, product, and environmental protection through advanced construction techniques and electronic controls.

In-VitroCell CO2 Incubators from NuAire provide optimal growth conditions for your cells. Available in direct heat and water jacket with popular upgrades such as O2 control, RH Control, and more.

Learn the technical side of the NU-5800 Series Direct Heat CO2 Incubator. Dimensions, performance, and more.

LabGard model NU-813 is a Class I Containment Ventilated Enclosure providing personnel protection for handling low-risk aerosols and particulate matter.

Centrifuges must be operated correctly and undergo regular maintenance in order to achieve maximum lifespan.

Updating or adding a NuWind Centrifuge program can be achieved by selecting the proper icon with your finger located on the touchscreen controls and clicking save.

Gaskets located on a NuWind Centrifuge rotor help to create a secure bond between the lid and the body of the rotor. Replacing a gasket is part of preventative maintenance that will assist as a safety

The bucket of a NuWind centrifuge features a cam action type lock to securely create a biosafety seal between the bucket and lid.

Changing a rotor on a NuWind Centrifuge can be done in as little as 10 seconds. A twist of a dial, removal of a rotor, placement of a new rotor, an audible "Click" you are done.

Removing and installing a rotor on a NuWind centrifuge is as simple as a twist of a dial and listening for an audible "Click".

Preventative maintenance such as greasing your centrifuge on a regular basis ensures a long product life and better results.

Just unpacked your NuWind Centrifuge? Learn the basic setup instructions to power on your new Centrifuge.