LabGard ES (Energy Saver) model NU-435 is an NSF/ANSI 49 certified Class II, Type B2 Biosafety Cabinet. Model NU-435 is configured to meet the requirements of NFPA-45 as a fume hood as tested and classified to meet UL 1805. View these specifications to define product characteristics, dimensions, and more before any purchase.
Other content in this Stream
![[Spec] NU-540 Class II, Type A2 Biosafety Cabinet (115V)](https://content.cdntwrk.com/files/aT03MTg4MjcmcD0wJnZlcnNpb249MiZjbWQ9diZzaWc9N2E4MjAxYTVjM2Q2MzljZTM2ZDRiMWNkZWNmMDFkN2E%253D/-w-320.jpg)
[Spec] NU-540 Class II, Type A2 Biosafety Cabinet (115V)
Product specifications for LabGard Class II, Type A2 Biosafety Cabinet (BSC) model NU-540 115-volt from NuAire Laboratory Equipment.
![[Spec] Class II, Type B2 Biosafety Cabinet NU-430 Specification (115V)](https://content.cdntwrk.com/files/aT03MjE3NzAmcD0wJnZlcnNpb249MiZjbWQ9diZzaWc9ZjVjNjBkNzAyNTI4OGQwNTQ1NzU0YzBkODZiNjNjM2Q%253D/-w-320.jpg)
[Spec] Class II, Type B2 Biosafety Cabinet NU-430 Specification (115V)
LabGard model NU-430 Class II, Type B2 Total Exhaust Biosafety Cabinet specification.
![[Spec] Class II, Type B1 Biosafety Cabinet Model NU-427 Specification (115V)](https://content.cdntwrk.com/files/aT03MjE3NzMmcD0wJnZlcnNpb249MiZjbWQ9diZzaWc9YzFkM2UzNTFjMzRkNWJiODlkMGFlZjQ5MWRiMWZkODk%253D/-w-320.jpg)
[Spec] Class II, Type B1 Biosafety Cabinet Model NU-427 Specification (115V)
View specifications for NSF/ANSI 49 listed LabGard Model NU-427 Class II, Type B1 Biosafety Cabinet.
![[Brochure] LabGard AIR NU-543 Class II, Type A2 Biosafety Cabinet](https://content.cdntwrk.com/files/aT03MTg4MDkmcD0wJnZlcnNpb249MiZjbWQ9diZzaWc9MGNhOGVkZjU4MGQyYjRiZWM4NjAyMTRhMDc1ZjgzOGY%253D/-w-320.jpg)
[Brochure] LabGard AIR NU-543 Class II, Type A2 Biosafety Cabinet
LabGard AIR Model NU-543 Class II, Type A2 Biosafety Cabinet provides long lasting personnel, product, and environmental protection through advanced construction techniques and electronic controls.
![[Brochure] In-VitroCell CO2 Incubator](https://content.cdntwrk.com/files/aT03MjE3NTUmcD0wJnZlcnNpb249MyZjbWQ9diZzaWc9NDE5NjIyYmRkZGEzNjM2YzI5YWQ2YmQ4MDZlYmRiYjE%253D/-w-320.jpg)
[Brochure] In-VitroCell CO2 Incubator
In-VitroCell CO2 Incubators from NuAire provide optimal growth conditions for your cells. Available in direct heat and water jacket with popular upgrades such as O2 control, RH Control, and more.
![[Specification] NU-5800 Series Direct Heat CO2 Incubator](https://content.cdntwrk.com/files/aT03MjM1NTImcD0wJnZlcnNpb249MiZjbWQ9diZzaWc9NGE4NTk3MGVjZDg1NjNlNjAwYzc3YWZkOGJkZjljNmU%253D/-w-320.jpg)
[Specification] NU-5800 Series Direct Heat CO2 Incubator
Learn the technical side of the NU-5800 Series Direct Heat CO2 Incubator. Dimensions, performance, and more.
![[Spec] Class I Containment Ventilated Enclosure NU-813 (115V, 230V)](https://content.cdntwrk.com/files/aT03MjM1MTMmcD0wJnZlcnNpb249MiZjbWQ9diZzaWc9ZjU5MDU4N2RiOGMwZjI0MTA4MmZlYTgxZTAyOGFmMTg%253D/-w-320.jpg)
[Spec] Class I Containment Ventilated Enclosure NU-813 (115V, 230V)
LabGard model NU-813 is a Class I Containment Ventilated Enclosure providing personnel protection for handling low-risk aerosols and particulate matter.
![[White Paper] Centrifuge Maintenance: Protecting the Investment](https://content.cdntwrk.com/files/aT03MzI0OTImcD0wJnZlcnNpb249MSZjbWQ9diZzaWc9ZWEyZWFiYzlhMWRkYzg5ZmQ1MjU4MzEwYjkyNzJlNGY%253D/-w-320.jpg)
[White Paper] Centrifuge Maintenance: Protecting the Investment
Centrifuges must be operated correctly and undergo regular maintenance in order to achieve maximum lifespan.

Modify A NuWind Centrifuge Program
Updating or adding a NuWind Centrifuge program can be achieved by selecting the proper icon with your finger located on the touchscreen controls and clicking save.

How To Change A NuWind Centrifuge Rotor Gasket
Gaskets located on a NuWind Centrifuge rotor help to create a secure bond between the lid and the body of the rotor. Replacing a gasket is part of preventative maintenance that will assist as a safety

How To Install A NuWind Centrifuge Bucket Lid
The bucket of a NuWind centrifuge features a cam action type lock to securely create a biosafety seal between the bucket and lid.

How To Change A NuWind Centrifuge Rotor
Changing a rotor on a NuWind Centrifuge can be done in as little as 10 seconds. A twist of a dial, removal of a rotor, placement of a new rotor, an audible "Click" you are done.

How To Install A NuWind Centrifuge Rotor
Removing and installing a rotor on a NuWind centrifuge is as simple as a twist of a dial and listening for an audible "Click".

How To Grease Your Centrifuge
Preventative maintenance such as greasing your centrifuge on a regular basis ensures a long product life and better results.

Initial Startup of a NuWind Centrifuge