[White Paper] Four Questions to Guide Centrifuge Selection

October 26, 2016

Share this Flipbook
Facebook
Twitter
Email
LinkedIn

Centrifuge Selection Guide A centrifuge is an integral component of a laboratory and is critical to the success of analysis. However, choosing the correct centrifuge for a particular application can be a daunting task. Centrifuges are available in a wide range of sizes, capacities, and capabilities. Options range from mini-centrifuges that hold only a few small tubes and spin several thousand RPM, to high-capacity centrifuges holding up to 6 liters of samples, to ultra-centrifuges that spin upwards of 100,000 RPM.

Previous Flipbook

[White Paper] Can a Class I and Class II BSC be in the same Sterile Hazardous Drug (HD) Room?

USP 800 does not directly address the pre-sterilization process of a sterile preparation creating the quest...

Next Flipbook

[White Paper] When to Replace Your Laboratory Centrifuge

Learn when to replace your aging laboratory centrifuge.

Most Recent Flipbooks

[White Paper] Ultralow Freezer: Proper Use and Preventative Maintenance

[White Paper] Four Questions to Guide Centrifuge Selection

Previous Flipbook

Next Flipbook

Most Recent Flipbooks

Eight critical preventive maintenance tips for Minus 80 Ultralow Temperature (ULT) Freezers.

This guide will help lab managers understand risks and best practices as they develop training for CO2 incubator users and establish a preventive maintenance program and setup criteria.

Proper use and care on a daily basis remain critical to maximize performance and extend the service life of a laboratory centrifuge.

This paper compares them and examines IR and TC CO2 Sensor technology in CO2 Incubators and what might be best for a given laboratory.

How to Perform a Hazardous Drug Risk Assessment in the Compounding Pharmacy.

Direct Heat or Water Jacketed CO2 Incubators, select the right cell growth technology for your research application.

HEPA versus ULPA filters, what makes the most sense in a biosafety cabinet.

Learn about the use of HEPA filters in biosafety cabinets.

Handling hazardous drugs in the compounding pharmacy, per USP chapter <800> guidelines, involves strategic workflow strategies with the goal of minimizing personnel and environmental exposure.

USP 800 is going to financially impact your pharmacy’s future business model so this white paper focuses on five important details that define the "why" for considering a capital investment.

USP 800 does not directly address the pre-sterilization process of a sterile preparation creating the question can a class I and a Class II biosafety cabinet be used in the same sterile HD room?

Learn when to replace your aging laboratory centrifuge.

Learn the benefits and risks of using an ultraviolet light in a biosafety cabinet.

Centrifuges must be operated correctly and undergo regular maintenance in order to achieve maximum lifespan.

The focus of this article is to discuss the details for consideration of a good working design of a USP 800 compliant compounding lab.

Find the answer to the question how long do HEPA filters last in a Biosafety Cabinet.

By purchasing BSC's that adhere to Biosafety Cabinet Industry Standards, customers can be confident that they are working with BSC's that meet industry guidelines.

As a Principal Investigator learn who you should invovle when purchasing a biosafety cabinet (BSC).

Read this Ultralow Freezer Buying Guide to learn what questions to ask when purchasing your next ultralow temperature freezer.

This white paper will provide insight into key considerations during the process of buying new vs used laboratory equipment.