[Instructions] CO2 Incubator Copper Water Pan NU-5860 Instructions

January 16, 2018

CO2 Incubator Copper Water Pan NU-5860 InstructionsNuAire recommends the use of this CO2 Incubator humidity water pan for when copper components are desired as a part of the chamber contamination control. Place the pan on the bottom of the incubator chamber. The pan should be surface disinfected before usage with 70% alcohol or similar disinfectant. Fill with single deionized or distilled water (No purer than 1 mega ohm). No other additives are required for effective antimicrobial properties.

Previous Flipbook
[Instructions] NU-1553 CO2 Incubator Stacking Table Operation and Maintenance Manual
[Instructions] NU-1553 CO2 Incubator Stacking Table Operation and Maintenance Manual

The NU-1553 stacking table is designed to support a second Autoflow or In-VitroCell CO2 Incubator over the ...

Next Flipbook
[White Paper] How to Choose Between Infrared and Thermal conductivity CO2 Sensors in Incubators
[White Paper] How to Choose Between Infrared and Thermal conductivity CO2 Sensors in Incubators

This paper compares them and examines IR and TC CO2 Sensor technology in CO2 Incubators and what might be b...

Shop CO2 Incubators

View Now