[Video] Laminar Airflow Workstation Smoke Flow Demonstration

October 9, 2019

Share this Video
Facebook
Twitter
Email
LinkedIn

AireGard models NU-240 and NU-340 Laminar Airflow Workstations provide product protection by using horizontal laminar airflow over the work zone. The design of the airflow eliminates turbulent airflow around the edges of the airflow diffuser creating true laminar air.

Previous Video

[Video] Installing an IV bar on a Pharmacy Isolator

How to install an IV bar on a NuAire Compounding Isolator

Next Video

[Video] How To Change A NuWind Centrifuge Rotor Gasket

Replacing a centrifuge gasket is part of preventative maintenance that will assist as a safety measure in t...

Most Recent Videos

0:30

[Video] Class II Biosafety Cabinet Airflow Demo with Smoke

[Video] Laminar Airflow Workstation Smoke Flow Demonstration

Previous Video

Next Video

Most Recent Videos

<p>Watch how the airflow in a Class II Biosafety Cabinet (BSC) offers personnel and product protection with the use of smoke.</p>

Removing and installing a rotor on a NuWind centrifuge is as simple as a twist of a dial and listening for an audible "Click".

Testing the adjustable base stand of your new pharmacy isolator is a great way to ensure your product is workly correctly.

Watch what items you should check off your list once your pharmacy isolator arrives at your loading dock.

Changing a rotor on a NuWind Centrifuge can be done in as little as 10 seconds. A twist of a dial, removal of a rotor, placement of a new rotor, an audible "Click" you are done.

The bucket of a NuWind centrifuge features a cam action type lock to securely create a biosafety seal between the bucket and lid.

Maintain sterility in your PharmaGard isolator by avoiding disrupting air over items located on the work surface.

The AllerGard NU-620 Animal Transfer Station offers personnel and product protection through a dynamic air barrier created at the openings of the cabinet.

Watch our product manager discuss our new Centrifuge offering during PITTCON 2016

Watch and learn more about LabGard Biosafety Cabinet model NU-540.

Learn 10 working safely tips when working in a biosafety cabinet.

Airflow in a negative pressure compounding aseptic containment isolator (CACI) is designed to keep you safe.

Changing gloves on your Compounding Aseptic Containment Isolator must be done on a routine basis. Follow these simple steps to safely change your CACI gloves.

Changing sleeves on your Compounding Aseptic Containment Isolator is recommended at minimum twice a year (please follow your SOP). Follow these simple steps to safely change your CACI sleeves.

Changing sleeves on a Compounding Aseptic Isolator (CAI) must be done at minimum twice a year (follow your SOP). Watch this video to safely and easily change your sleeves.

Learn how to properly replace sharps and waste receptacles on a PharmaGards NR797 or NTE797.

How to clean your Compounding Aseptic and Containment Isolators.

replacing-a-waste-receptacle-on-a-pharmagard-pr797-5

Smoke flow demonstration inside a NuAire Compounding Aseptic Isolator (CAI) displaying laminar airflow.

Introduction of Materials into a Compounding Aseptic Isolator.