[ebook] 10 Steps to Cleaning a Spill in a Biosafety Cabinet

September 9, 2016

10 Steps to Cleaning a Spill in a Biosafety Cabinet It happens at some point to even the most seasoned laboratory technician that a spill occurs within the Biosafety Cabinet (BSC). Taking precautionary measures before and during your work with hazardous materials could help keep you and others safe. Remember, if a spill occurs, don’t panic. Here are some simple steps to keep you and your laboratory safe. Please check with your Environmental Health and Safety (EHS) office or Biosafety Officer to ensure you have proper steps in place in case of a spill based of standard Biosafety in Microbiological and Biomedical Laboratories (BMBL).

[Infographic] 10 Tips for Working Safely in the laboratory with Your Biosafety Cabinet

Good technique when working within a Class II Biosafety Cabinet will minimize air turbulence and prevent sp...

Next Video

How To Install A NuWind Centrifuge Bucket Lid

The bucket of a NuWind centrifuge features a cam action type lock to securely create a biosafety seal betwe...

Laboratory Equipment Resource Center - A place to read, watch and learn.

[ebook] 10 Steps to Cleaning a Spill in a Biosafety Cabinet

Previous Article

Next Video

[ebook] 10 Steps to Cleaning a Spill in a Biosafety Cabinet

Previous Article

Next Video

Other content in this Stream

Learn 10 working safely tips when working in a biosafety cabinet.

Proper preventative maintenance, yearly maintenance, and certification are needed to maximize your products life as well as keep up to date with industry standards to eliminate safety hazards.

After work has been completed proper protocols must be followed to decontaminate the biosafety cabinet to avoid potential contamination risks.

An important part of a safe work environment is making sure it is ergonomically designed to work with you, not against you.

Proper technique when working within the BSC will minimize air turbulence and prevent splatter or unwanted spread of aerosols.

The use of proper procedures in the Biosafety Cabinet (BSC) cannot be overemphasized in providing primary personnel and environmental protection.

Learn steps to take before you begin work in your Biological Safety Cabinet. A proper biosafety or operations manuals will specify practices and procedures designed to minimize and eliminate risks.

Biosafety Cabinets (BSCs) a are designed to remove or minimize exposures to hazardous biological materials and particulates.

Learn the basics of how NuAire Biological Safety Cabinets are designed to offer optimal personnel, environmental and product protection.

Learn some of the basic about biosafety cabinets (BSC) and how to go about selecting the right bsc for your application.

Read Strategies to Minimize Contamination in the Cell Culture Lab to learn how to identify potential contamination, steps to control mycoplasma contamination, and more.

Upon arrival of your Class II Biosafety Cabinet follow these steps for the basic assembly of your cabinet.

Learn the ideal location to install your Class II, Type A2 Biosafety Cabinet to maximize safety and performance.

Learn some of the basic about biosafety cabinets and how to go about selecting the right bsc for your application.

Learn some of the basic about biosafety cabinets (BSC) and how to go about selecting the right bsc for your application.

Product flyer for LabGard AIR Limited 230-volt Class II Biosafety Cabinet (BSC) model NU-545E.

Product flyer for LabGard AIR Limited Class II, Type A2 Biosafety Cabinet (BSC) model NU-545.

Learn the basics of how NuAire Biosafety Cabinets (BSC) are designed to offer optimal personnel, environmental and product protection.

Learn the Biosafety Cabinet Decommissioning Process with this infographic.