[White Paper] Purchasing a Biosafety Cabinet, Who to Involve

September 6, 2016

Share this Flipbook
Facebook
Twitter
Email
LinkedIn

Selecting and purchasing a biosafety cabinet (BSC) is a critical part of setting up or upgrading any laboratory. Making the correct decision requires experience and considerable technical knowledge. Laboratory managers, their research staff, and Environmental Health and Safety (EHS) personnel are the best source of the expertise necessary to purchase the correct Biological Safety Cabinet. They should play a key role in decisions so purchasing teams can avoid problems and additional costs associated with selecting the wrong BSC.

Previous Flipbook

[White Paper] Industry Standards Your Biosafety Cabinet Should Meet

By purchasing BSC's that adhere to Biosafety Cabinet Industry Standards, customers can be confident that th...

Next Flipbook

[Quick Start] NuWind NU-C200 Quick Start Guide

Quickly navigate through the InSight Touchscreen Control Center on your NuWind General Purpose Bench Top Ce...

Other content in this Stream

[Spec] NU-481 Specification (115V)

[White Paper] Purchasing a Biosafety Cabinet, Who to Involve

Previous Flipbook

Next Flipbook

Other content in this Stream

Product specifications for LabGard Class II, Type A2 Biosafety Cabinet (BSC) model NU-540 115-volt from NuAire Laboratory Equipment.

LabGard model NU-430 Class II, Type B2 Total Exhaust Biosafety Cabinet specification.

View specifications for NSF/ANSI 49 listed LabGard Model NU-427 Class II, Type B1 Biosafety Cabinet.

LabGard AIR Model NU-543 Class II, Type A2 Biosafety Cabinet provides long lasting personnel, product, and environmental protection through advanced construction techniques and electronic controls.

In-VitroCell CO2 Incubators from NuAire provide optimal growth conditions for your cells. Available in direct heat and water jacket with popular upgrades such as O2 control, RH Control, and more.

The Class II, Type C1 Biosafety Cabinet (BSC) is similar to a Type B1 regarding airflow pattern. The Type C1 has a portion of the work surface to exhaust air.

Learn the technical side of the NU-5800 Series Direct Heat CO2 Incubator. Dimensions, performance, and more.

LabGard model NU-813 is a Class I Containment Ventilated Enclosure providing personnel protection for handling low-risk aerosols and particulate matter.

Learn the proper use procedures from start up to shut down when using your Biosafety Cabinet.

Centrifuges must be operated correctly and undergo regular maintenance in order to achieve maximum lifespan.

We asked NIH National Biosafety and Biocontainment Fellows what some of the most common mistakes made when working with a Biosafety Cabinet.

When working in your biosafety cabinet with hazardous drugs it is important to learn the proper procedure from beginning to end.

Good technique when working within a Class II Biosafety Cabinet will minimize air turbulence and prevent splatter or unwanted spread of aerosols.

It happens at some point to even the most seasoned laboratory technician that a spill occurs within the Biosafety Cabinet (BSC). Here are a few steps to cleaning a spill in a BSC.

Updating or adding a NuWind Centrifuge program can be achieved by selecting the proper icon with your finger located on the touchscreen controls and clicking save.

Gaskets located on a NuWind Centrifuge rotor help to create a secure bond between the lid and the body of the rotor. Replacing a gasket is part of preventative maintenance that will assist as a safety