NuWind NU-C200V General Purpose Bench Top 2 Liter Ventilated Centrifuge

NuWind Centrifuges offer larger capacity in a smaller footprint. The ability to change rotors within seconds allows for multi-application use in cell culture, bio-production, blood separation, microbiology and more.

Part #: NU-C200V


Process any protocol in cell culture, bioproduction, blood separation or microbiology with this NuWind ventilated bench top centrifuge. This small-footprint centrifuge provides a significant capacity and plenty of speed.


ClickSpin Tool-less Rotor Removal and Installation Click-Spin for Easy Rotor Exchange

Exchange rotors with a simple twist and hear an audible “click,” no tools required. Removing and replacing rotors is so easy that you can quickly move from one task to another.

InSight Electronic Control CenterInSight Electronic Control Center

Control the centrifuge with the simple, user-friendly InSight electronic control center (ECC). The touchscreen uses clearly defined menus and icons to let you quickly identify tasks, helping to eliminate errors. The InSight ECC alerts when a cycle ends displays service notifications and calibrates imbalances. You can also enter and save up to 100 programs and easily transfer them to another ECC.

Bio-Lid Design

The bio-lids let you open and close the buckets with a single hand, and you can install and remove them with the buckets on the rotor.


Imbalance Protection

If the rotor is not evenly loaded and balanced, and vibrations become too high, the centrifuge stops automatically. You can override this process by manually setting tolerance levels.

Rotor Recognition

Built-in detection of NuWind rotors enables the centrifuge to set speeds that cannot exceed the rotor's maximum.

Auto Lid Lock

Prevent users from opening the lid while the centrifuge is running with the automatic lid lock. It also ensures that the rotor is securely installed and won't damage the centrifuge.

End of Run Notification End-of-Run Notification

Be alerted when the centrifuge cycle is complete, even in noisy environments, with an end-of-cycle light as well as an audible alarm.


Power Factor Control

Keep power to the centrifuge clean with the Power Factor Control (PFC), which provides constant, uniform voltage and amperage to the motor to give you results that are consistent with quality, highly reliable and 100 percent repeatable.

Temperature Control and Ventilation

Ensure the chamber temperature remains under 37 degrees Celsius with this NuWind ventilated model. It draws cold air from the front of the unit, and the air heated by the operating centrifuge exhausts from the bottom of the unit so heat doesn't build up. The warm air from the motor exhausts the same way.


Small Footprint, Big Capacity

Take advantage of the extra capacity in this small centrifuge. The 0.5-inch steel shell minimizes exterior size while providing more interior space, durability, and speed.


5 Year Parts and Labor (United States and Canada)

4 Year Parts (Global)

Stanard Features

  • InSight Electronic Control System (ECS)
  • 100 Programs with Title
  • ClickSpin™ Compliant Rotor Shaft
  • Rotor Recognition
  • Energy Efficient Motor
  • Power Factor Control
  • End of Run Notification
  • Imbalance Detection
  • Automatic Locking Lid
  • Safety Wall Design
  • First Air Ventilation
  • RS232 Connection
  • Manual Lid Unlock
  • Power Cord
Parts & Accessories

Electrical Requirements


NU-C200V: 115V, 50/60Hz

NU-C200VE: 230V, 50/60Hz

Max Power 900 W
Heat Dissipation 3071 BTU/h
Quality Assurance UL, UL-C

Dimensions and Weight

Max Capacity 4 x 625 ml
Exterior Dimensions (W x D x H)

18 x 23.8 x 13.7 in

457 x 604 x 347 mm

Net Weight

157 lbs

71 kg






Max Noise Level

< 60 dba



Max Speed

NU-RX500 + NU-B500 Swing-out 4x500 ml Rotor with Round Buckets rpm 4500
x g 4160
NU-RX500 + NU-BXDW Swing-out 4x500 ml Rotor with Micro-plate Carriers rpm 4500
x g 3500
NU-RHDW + NU-BHDW Swing-out Micro-plate Rotor with Micro-plate Buckets rpm 4500
x g 3530
NU-RX250 + NU-B250 Swing-out 4x250 ml Rotor with Round Buckets rpm 4500
x g 4080
NU-RA24-2 24 x 2 ml Angle Rotor 45° rpm 15300
x g 22380
NU-RA30-2 30 x 2 ml Angle Rotor 45° rpm 15300
x g 25350
NU-RA48-2 48 x 2 ml Angle Rotor 45° rpm 14000
x g 21720
NU-RA16-5 16 x 5 ml Angle Rotor 45° rpm 13200
x g 21000
NU-RA8-50 8 x 50 ml Angle Rotor 25° rpm 10700
x g 13000

Tube Specifications for Bucket Inserts and Capacities

Brand Greiner / BD Greiner / BD Greiner / BD / Terumo DB Corning Corning Corning        
Volume 5 ml 7 ml 10/15 ml 15 ml 15 ml 50 ml 50 ml 100 ml 200 ml 400 ml 625 ml
Tube Collection Tube Cell Preparation Tube CPT Conical Bottom Self Standing Round Bottom Conical Bottom Round Bottom Flat Bottom
1 Tube Range 12 to 13 12 to 13 15 to 17 16 15.6 to 17.5 29 to 29.6 29 to 29.6 45 62 80 94
2 Max Cap 17.5 17 18 18 23 36 36 - - - 60
3 Min. High Under Cap 57 76 63 125 84 76 78.5 - - - 131
4 Max. Total High 110 110 113 132 121 116.5 119 117 125 125 137

Adapter Description

Reference Rotor NU-RX500 / Set of 4 Buckets (NU-B500) / Set of 4 Lids (NU-L500)

4x500 ml Rotor Insert Capacity 23 23 19 7 11 5(1) 4 5 1 1 1 1
Insert Reference NU-2T5 NU-2T7 NU-2T10 NU-2T15C NU-2T15C NU-2T50C NU-2T50CL NU-2T50S NU-2T100 NU-2T200 NU-2T400 No Insert Required
Rotor Capacity 92 92 76 28 44 20 16 20 4 4 4 4

Reference Rotor NU-RX250 / Set of 4 Buckets (NU-B250) / Set of 4 Lids (NU-L250)

4x250 ml Rotor Insert Capacity 15 15 12 3 7 4 3 3 1 1    
Insert Reference NU-1T5 NU-1T7 NU-1T10 (2)   NU-1T15C NU-1T50C NU-1T50CL NU-T50S NU-1T100 NU-1T200    
Rotor Capacity 60 60 48 12 / 4 28 16 12 12 4 4    

Microplate and Deep Well Capacities




Deep Well Micro-Plates

NU-RX500 + NU-BXDW Swing-out 4x500 ml Rotor with Micro-plate Carriers 4x4 4x1
NU-RHDW + NU-BHDW Swing-out Micro-plate Rotor with Micro-plate Buckets 2x4 2x1

Download Resources
NuWind NU-C200V Ventilated Bench Top Centrifuge


Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register