NuAire started manufacturing laboratory equipment back in 1971. If you can believe it, some of those products are still in use today! If possible, we try to service and maintain these products. Can you image the changes products have gone through over 40 years of time? Since we have to match your product to a particular range of replacement parts, at the moment the only way to accurately match replacement parts to your product is through a manual process (Note: we have plans to digitize the process and create a better experience for you). It might take a little longer, but we want to ensure we offer the correct part to get you back up and running. The products below are some of the most popular parts that are purchased on a routine basis. If you do not see your part in the list below or would like to bypass the search process, please request a part by clicking on the button below. Thank you for your patience and understanding.
Part Number |
Description |
NU-RX250 | 4x250ml Swing Out Rotor |
NU-B250 | Set of 4 Round Buckets |
NU-1T5 | Set of 4 inserts for 5ml collection tubes |
NU-1T10 | Set of 4 inserts for 10/15ml collection tubes |
NU-RS2 | Rotor stand |
Part Number |
Description |
NU-RX250 | 4x250ml Swing Out Rotor |
NU-B250 | Set of 4 Round Buckets |
NU-1T15C | Set of 4 inserts for 15ml conical tubes |
NU-1T50C | Set of 4 inserts for 50ml conical tubes |
NU-RS2 | Rotor stand |
Part Number |
Description |
NU-RX500 | 4x500ml Swing Out Rotor |
NU-B500 | Set of 4 Round Buckets |
NU-2T5 | Set of 4 inserts for 5ml collection tubes |
NU-2T10 | Set of 4 inserts for 10/15ml collection tubes |
NU-RS2 | Rotor stand |
Part Number |
Description |
NU-RX500 | 4x500ml Swing Out Rotor |
NU-B500 | Set of 4 Round Buckets |
NU-2T15C | Set of 4 inserts for 15ml conical tubes |
NU-2T50C | Set of 4 inserts for 50ml conical tubes |
NU-RS2 | Rotor stand |
The RX-500 is a swing out rotor designed for Centrifuge models NU-C200V and NU-C200R reaching speeds up to 5100 rpm (5350 xg) featuring the patented technology ClickSpin allowing for the quick removal and replacement of the rotor.
Learn MorePart number NU-R-50/15 is an adaptor for 15 ml conical tubes that comes in a set of 8 to fit 50 ml slots on centrifuge angle rotor NU-RA8-50.
Learn MorePart number NU-RA16-5 is a 45° angled rotor for 5 ml collection tubes featuring a capacity of 16.
Learn MorePart number NU-RA24-2 is a 45° angled rotor for 1.5/2 ml micro-tubes featuring a capacity of 24.
Learn MorePart number NU-RA30-2 is a 45° angled rotor for 1.5/2 ml micro-tubes featuring a capacity of 30.
Learn MorePart number NU-RA48-2 is a 45° angled rotor for 1.5/2 ml micro-tubes featuring a capacity of 48.
Learn MorePart number NU-RA8-50 is a 25° angled rotor for 50 ml conical tubes featuring a capacity of 8.
Learn MorePart number NU-L250 is a bio-containment lid that comes as a set of 4 that creates a tight seal on round bucket part number NU-B250.
Learn MorePart number NU-L500 is a bio-containment lid that comes as a set of 4 that creates a tight seal on round bucket part number NU-B500.
Learn MorePart number NU-LH is a bio-containment lid that comes as a set of 2 that creates a tight seal on microplate bucket part number NU-BHDW.
Learn MoreHazardous Sharps Collectors feature a wide entry port design for disposal of bulky chemotherapy waste. In addition, these collectors are designed to offer increased leak resistance.
Learn MorePart number NU-RS2 is a stand to be used for NuWind centrifuge rotors for models NU-C200V and NU-C200R.
Learn MorePart number NU-RA30-15 is a 37° angled rotor for 15 ml round bottom collection tubes featuring a capacity of 30.
Learn MoreAdditional Incubator tubing to connect gas systems sold by the foot (.30480 m).
Learn MoreUse cotton liner gloves to wear inside Nitrile or Nitir-Dex gloves to absorb perspiration helping protect hands from dermatitis and other skin irritations.
Use cotton liner gloves to wear inside Nitrile or Nitir-Dex gloves to absorb perspiration helping protect hands from dermatitis and other skin irritations.
Dry In-Line Filter Replacement for CO2 and Air Inlet. Filters contaminated laboratory air or gas before entering the incubator growth chamber.
Learn MoreReplacement Garter Spring for Glove Ring
Learn More