- Contact Us
The NuWind™ General Purpose 4 Liter Refrigerated Centrifuge is benchtop refrigerated floor centrifuge that can be used for the separation of substances at different densities that are held in suspension or emulsion in a liquid. It is designed to maximize productivity in the laboratory since it only takes up a minimal amount of space. The NuWind™ centrifuge offers precise temperature control and uses CFC-free refrigerant.
The NuWind™ General Purpose 4 Liter Refrigerated Floor Centrifuge was designed with ClickSpin technology, which allows for easy changing of rotors -- no tools needed. To change a rotor with ClickSpin, just align the rotor with the motor shaft, and you will hear an audible “Click” as it locks itself into place. Unlocking a rotor is as simple as twisting the red dial on top of the rotor. An audible “Click” will let you now the rotor has been released.
For easy operation of the centrifuge, the NuWind™ 4 Liter has the InSight™ Electronic Control Center, a plug-and-play control center that is operated via the touch screen. Lab technicians can use the InSight™ Electronic Control Center to control 100 programs, read service reminders, keep a logbook of accessories, and more.
When a centrifuge run is done, the model displays an end-of-cycle light for visual notification that the cycle has completed.
This model of NuWind™ centrifuge offers refrigeration for products inside. It is also designed to provide precise temperature control, to ensure maximum performance and product protection.
The refrigerated floor centrifuge has rotor recognition technology that allows it to recognize which rotor is installed and ensure that the rotor does not achieve any speed over its intended use.
The NuWind™ 4 Liter centrifuge is outfitted with imbalance protection technology, which can detect whether samples are loaded and balanced. It will stop the rotor if a high level of vibrations is detected.
The refrigerated floor centrifuge has Power Factor Control, which allows uniform voltage and amperage to be supplied to the motor. This means you can quickly repeat the quality of your centrifugation.
The lid of the NuWind™ centrifuge is easy to close and automatically locks through a fastening system. The lid cannot be opened while the centrifuge is in operation and the rotor has come to a halt ensuring lab safety.
5 Year Parts and Labor (United States and Canada)
4 Year Parts (Global)
|Electrical Configuration||120V, 60Hz|
|Maximum Capacity||4 x 1000 ml|
|Maximum RCF||16,660 xg|
|Maximum Speed||12,100 rpm|
|Speed Control Precision||± 10 rpm|
|Total Power Consumed||1700 Watt|
|Dissipated Heat||5801 BTU/h|
|Imbalance Detection Sensor||Yes|
|Motorized Lid Lock||Yes|
|Rotor Speed Control||Yes|
|Maximum Sound Level||≤ 57 dba|
|Number of Programs||99|
|Exterior Dimensions (W x D x H)||32.7 x 26.4 x 27.2 inches (830 x 670 x 690 mm)|
|Net Weight||375 lbs / 170 kg|
|NU-RX750 + NU-B750||Swing-out 4x750 ml Rotor with Round Buckets||rpm||4600|
|NU-RX750 + NU-BXDW3||Swing-out 4x750 ml Rotor with Micro-plate Carries||rpm||4600|
|NU-RX500 + NU-B500||Swing-out 4x500 ml Rotor with Round Buckets||rpm||5100|
|NU-RX500 + NU-BXDW||Swing-out 4x500 ml Rotor with Micro-plate Carriers||rpm||5100|
|NU-RHDW + NU-BHDW||Swing-out Micro-plate Rotor with Micro-plate Buckets||rpm||5100|
|NU-RX250 + NU-B250||Swing-out 4x250 ml Rotor with Round Buckets||rpm||5100|
|NU-RA16-5||16 x 5 ml Angle Rotor 45°||rpm||13200|
|NU-RA8-50||8 x 50 ml Angle Rotor 25°||rpm||12100|