Accessories

Laboratory Accessories are the essential tools needed to make a laboratory operate. NuAire Laboratory Accessories help in every facet of research and producing sterile product. Select from one of many NuAire accessories to customize your workflow.

151-164 of 164

per page
Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. NU-1550 TankGuard Automatic CO2 Incubator Tank Switch
    NU-1550 TankGuard Automatic CO2 Incubator Tank Switch
    NuAire's Automatic Tank Switch is easy to install connecting tank tubes by hose barb on the back of unit. The tank switch automatically changes to an alternate CO2 or N2 gas tank when the primary tank is empty. Learn More
  2. PharmaGard Benchtop Mount Base (NU-PR797/NR797/NTE797 -600 Models)
    PharmaGard Benchtop Mount Base (NU-PR797/NR797/NTE797 -600 Models)
    The PharmaGard bench mount provides proper support to the isolator for resting on a benchtop. Learn More
  3. Portable Ultraviolet Light - 19" (482 mm) length
    Portable Ultraviolet Light - 19" (482 mm) length

    The germicidal ultraviolet is primarily intended for the destruction of bacteria and other microorganisms in the air or on directly exposed surfaces.

    Learn More
  4. Portable Ultraviolet Light - 37" (940 mm) length (115V)
    Portable Ultraviolet Light - 37" (940 mm) length (115V)

    The germicidal ultraviolet is primarily intended for the destruction of bacteria and other microorganisms in the air or on directly exposed surfaces.

    Learn More
  5. Round Buckets 250 ml Capacity (Set of 4)
    4 Centrifuge Round Buckets 250 ml Capacity

    Part number NU-B250 is a set of 4 round buckets that offer 250 ml capacity each. The interior of the bucket can be used with various inserts specifically designed for tubes or bottles. NU-B250 is to be used with rotor part number NU-R250 on NuWind centrifuge models NU-C200V and NU-C200R.

    Learn More
  6. Round Buckets 500 ml Capacity (Set of 4)
    4 Centrifuge Round Buckets 500 ml Capacity

    Part number NU-B500 is a set of 4 round buckets that offer 500 ml capacity each. The interior of the bucket can be used with various inserts specifically designed for tubes or bottles. NU-B500 is to be used with rotor part number NU-B500 on NuWind centrifuge models NU-C200V and NU-C200R.

    Learn More
  7. Round to Round Transition, Duct to Hood transition connection - 8" to 10"
    Round to Round Transition, Duct to Hood transition connection - 8" to 10"
    The round to round exhaust transition has an airtight construction that ensures exhausted air will not leak. The lightweight, galvanized steel prevents rust, and is very easy to install! - Galvanized steel prevents rust - Airtight Construction - Lightweight - Easy to install Learn More
  8. Silicone Connection Sleeve Kit for all Models
    Silicone Connection Sleeve Kit for all Models
    Easily connect exhaust transitions to ductwork. The Silicone Connection Sleeve Kit will reduce noise and help prevent possible environmental contamination. It easily connects from an exhaust transition to duct work and installs quickly! Kit Contains: - 60 x 6 in. (1524 x 152 mm) Silicone Rubber Sleeve - Two (2) Band Clamps - [1] Tube RV Sealant Learn More
  9. Single Stage CO2 Regulator
    Single Stage CO2 Regulator

    The NuAire single stage regulator is designed for CO2 gas delivering precise and stable pressure control.

    Learn More
  10. Stainless Steel Turntable
    Stainless Steel Turntable
    This stainless steel rotating table (Lazy Susan) extends users reach up to 12" (305 mm) allowing more efficient use of the work surface and reducing tension and stress of the arms and shoulders that arises from reaching into a safety cabinet for extended periods of time. - 100% Stainless Steel - Easy to Clean, Autoclavable - 12" (305 mm) Diameter - Stainless Steel Ball Bearing Design Learn More
  11. Super Foam Stainless Steel Cleaner
    Super Foam Stainless Steel Cleaner
    A water-based Foaming Stainless Steel Cleaner is perfect for cleaning, polishing, and preserving stainless steel surfaces. Learn More
  12. Swing-Out Rotor 4x250 ml
    Centrifuge Part/Accessory - Swing-Out Rotor 4x250 ml

    Part number NU-RX250 is a swing out for round buckets NU-B500.

    Learn More
  13. Variable Range Flow Exhaust Canopy for Class II, Type A2 Biosafety Cabinets (models 475, 477, 480, 481)
    Variable Range Flow Exhaust Canopy for Class II, Type A2 Biosafety Cabinets (models 475, 477, 480, 481)
    The Variable Flow Canopy for Class II, Type A2 Biological Safety Cabinets employs adjustable slide plates to vary slot height corresponding to the amount of room exhaust volume desired. Upon canopy low flow or loss of exhaust, the integrated airflow monitor will provide both an audible and visual alarm, and then energize a DC solenoid opens the front panel allowing the BSC inflow to be maintained at NSF recommended inflow velocities. - Preserves airflow balance within the BSC in a simple dependable manner. - Has a front service panel to permit exhaust HEPA filter integrity checks. - Simplifies exhaust system design. - Provides the adjustability for the amount of laboratory air exhausted whether more for general exhaust or to limit loss of conditioned air for greater energy efficiency. - Integrated audible and visual low exhaust alarm. - Provides a safety operational tolerance range for normal exhaust system fluctuations. - Models: NU-475, 477, 480, 481 Learn More
  14. Wright's Copper Cream
    Wright's Copper Cream

    Use Wright's® Copper Cream to clean and polish NuAire products featuring CuVerro® Antimicrobial Copper Surfaces.

    Learn More

151-164 of 164

per page
Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7