Parts

NuAire started manufacturing laboratory equipment back in 1971. If you can believe it, some of those products are still in use today! If possible, we try to service and maintain these products. Can you image the changes products have gone through over 40 years of time? Since we have to match your product to a particular range of replacement parts, at the moment the only way to accurately match replacement parts to your product is through a manual process (Note: we have plans to digitize the process and create a better experience for you). It might take a little longer, but we want to ensure we offer the correct part to get you back up and running. The products below are some of the most popular parts that are purchased on a routine basis. If you do not see your part in the list below or would like to bypass the search process, please request a part by clicking on the button below. Thank you for your patience and understanding.

Request a Part

51-75 of 86

per page
  1. Insert 7x15 ml Conical Tube (Set of 4)
    Centrifuge Insert 7x15 ml Conical Tube

    Part number NU-1T15C is a 7x15 ml conical tube insert that comes as a set of 4, compatible with round bucket part number NU-B250.

    Learn More
  2. Large Sharps Container
    Large Sharps Container

    With an exclusive funnel-shaped opening and safety neck, these sharps collectors are nestable for easy storage. They allow point-first drop and reduce the risk of tampering and spilling.

    Learn More
  3. Large Wet Capsule Filter
    Large Wet Capsule Filter
    Large Wet Capsule 0.3 Micron HEPA Filter Replacement for Water-jacket CO2 Incubators. Filters chamber air before entering sampling by IR sensor. - Models NU-4750, 4850, 4950, 8500, 8700 Learn More
  4. Microplate Bucket (Set Of 2)
    Two Centrifuge Microplate Bucket

    Part number NU-BHDW comes as a set of 2 microplate buckets to be used with rotor NU-RHDW on NuWind centrifuge models NU-C200V and NU-C200R.

    Learn More
  5. Microplate Bucket (Set of 4)
    4 Centrifuge Microplate Bucket

    Part number NU-BXDW comes as a set of 4 microplate buckets to be used with rotor NU-R500 on NuWind centrifuge models NU-C200V and NU-C200R.

    Learn More
  6. Microplate Rotor
    Microplate Rotor

    Part number NU-RHDW is a deep well microplate rotor.

    Learn More
  7. Mobile Platform with Leg Leveling Casters and Mounting Brackets for CO2 Incubators
    Mobile Platform with Leg Leveling Casters and Mounting Brackets for CO2 Incubators
    This accessory makes the incubator mobile for lab reorganization or cleaning. It is equipped with smooth-rolling casters that have built in leg levelers to add versatility in leveling and securing the equipment from moving during normal use. Learn More
  8. Nitri-Dex 707 Extra Large Gloves
    Nitri-Dex 707 Extra Large Gloves

    The Nitri-Dex® 707 glove is chemical resistant providing high dexterity to applications involving sterile preparations of non-hazardous drug compounding.

    • Hand Specific Packaging
    • 9 mil thickness
    • Tractor-tread grip
    • 12 pairs per package
    Learn More
  9. Nitri-Dex 707 Large Gloves
    Nitri-Dex 707 Large Gloves

    The Nitri-Dex® 707 glove is chemical resistant providing high dexterity to applications involving sterile preparations of non-hazardous drug compounding.

    • Hand Specific Packaging
    • 9 mil thickness
    • Tractor-tread grip
    • 12 pairs per package
    Learn More
  10. Nitri-Dex 707 Medium Gloves
    Nitri-Dex 707 Medium Gloves

    The Nitri-Dex® 707 glove is chemical resistant providing high dexterity to applications involving sterile preparations of non-hazardous drug compounding.

    • Hand Specific Packaging
    • 9 mil thickness
    • Tractor-tread grip
    • 12 pairs per package
    Learn More
  11. Nitri-Dex 707 Small Gloves
    Nitri-Dex 707 Small Gloves

    The Nitri-Dex® 707 glove is chemical resistant providing high dexterity to applications involving sterile preparations of non-hazardous drug compounding

    • Hand Specific Packaging
    • 9 mil thickness
    • Tractor-tread grip
    • 12 pairs per package
    Learn More
  12. Nitrile Ambidextrous Glove (Large)
    Nitrile Ambidextrous Glove (Large)
    • Powder-free Nitrile material will not react with skin
    • Chemotherapy Permeation Testing per ASTM D6978-05 “Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs”.
    • Contains an Aloe-Vera thin gel lining to help keep skin hydrated and healthy
    • Meets NFPA Standards
    • Textured Finger-tips helps grip
    • 50 gloves per box
    Learn More
  13. Nitrile Ambidextrous Glove (Medium)
    Nitrile Ambidextrous Glove (Medium)
    • Powder-free Nitrile material will not react with skin.
    • Chemotherapy Permeation Testing per ASTM D6978-05 “Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs”.
    • Contains an Aloe-Vera thin gel lining to help keep skin hydrated and healthy.
    • Meets NFPA Standards
    • Textured Finger-tips helps grip
    • 50 gloves per box
    Learn More
  14. Nitrile Ambidextrous Glove (Small)
    Nitrile Ambidextrous Glove (Small)
    • Powder-free Nitrile material will not react with skin
    • Chemotherapy Permeation Testing per ASTM D6978-05 “Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs”
    • Contains an Aloe-Vera thin gel lining to help keep skin hydrated and healthy
    • Meets NFPA Standards
    • Textured Finger-tips helps grip
    • 50 gloves/box
    Learn More
  15. Nitrile Ambidextrous Glove (X-Large)
    Nitrile Ambidextrous Glove (X-Large)
    • Powder-free Nitrile material will not react with skin
    • Chemotherapy Permeation Testing per ASTM D6978-05 “Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs”.
    • Contains an Aloe-Vera thin gel lining to help keep skin hydrated and healthy
    • Meets NFPA Standards
    • Textured Finger-tips helps grip
    • 50 gloves per box
    Learn More
  16. Nitrile Replacement Sleeves for PharmaGard CAI and CACI (10" Oval Glove Port)
    Nitrile Replacement Sleeves for PharmaGard CAI and CACI  (10" Oval Glove Port)

    Replacement sleeves for PharmaGard Compounding Aspetic and Containment Isolators with 10" Oval Glove Port

    • Flexible and shows outstanding tensile and compression stress qualities
    • Strong resistance to most aromatic hydrocarbons, petroleum solvents, oils, fats, acids, and greases
    • Recommended for ethanol, gasoline, hexane, isopropanol, turpentine, and xylene
    • Not prone to induce allergic reactions
    • Dissipates electrostatic charge
    • Resists puncture and offers excellent abrasion protection
    • Set of 2
    • Recommended Replacement: Every Six Months

    Compatible

    • PharmaGard PR797 Series 2 or Higher
    • PharmaGard NR797 Series 2 or Higher - PharmaGard NTE Series 1 or Higher
    Learn More
  17. Nitrile Replacement Sleeves for PharmaGard CAI and CACI (8" Round Glove Port)
    Nitrile Replacement Sleeves for PharmaGard CAI and CACI  (8" Round Glove Port)

    Replacement sleeves for PharmaGard Compounding Aspetic and Containment Isolators with 10" Oval Glove Port

    • Flexible and shows outstanding tensile and compression stress qualities
    • Strong resistance to most aromatic hydrocarbons, petroleum solvents, oils, fats, acids, and greases
    • Recommended for ethanol, gasoline, hexane, isopropanol, turpentine, and xylene
    • Not prone to induce allergic reactions
    • Dissipates electrostatic charge
    • Resists puncture and offers excellent abrasion protection
    • Set of 2
    • Recommended Replacement: Every Six Months

    Compatible

    • PharmaGard PR797 Series 1 or Lower
    • PharmaGard NR797 Series 1 or Lower
    Learn More
  18. P56ST Swinging Bucket Rotor 6 x 4ml tubes (HK-9022550M)
    P56ST Swinging Bucket Rotor 6 x 4ml tubes (HK-9022550M)

    Swinging bucket rotor for density gradient centrifugation of micro volume samples.

    • Part # HK-9022550M
    • Max Speed 56,000 rpm
    • Max RCF 409,000 xg
    • Capacity 6 x 4ml tubes
    • K-factor 54
    • Compatible with CP100WX, CP90WX, CP80WX
    Learn More
  19. P65ST Swinging Bucket Rotor 3 x 5ml tubes (HK-9022390M)
    P65ST Swinging Bucket Rotor 3 x 5ml tubes (HK-9022390M)

    Swinging bucket rotor for density gradient centrifugation of protein, DNA, RNA, etc.

    • Part # HK-9022390
    • Max Speed 65,000 rpm
    • Max RCF 419,000 xg
    • Capacity 3 x 5ml tubes
    • K-factor 48
    • Compatible with CP100WX, CP90WX, CP80WX
    Learn More
  20. Red Waste/Sharps Container
    Red Waste/Sharps Container

    Waste/Sharps Collectors feature a wide entry port design for disposal of bulky chemotherapy waste. In addition, these collectors are designed to offer increased leak resistance.

    Learn More
  21. Refill CO2 Analyzer Fluid Kit
    Refill CO2 Analyzer Fluid Kit
    Refill kit: CO2 Analyzer Fluid for your NU-1559 Fyrite Kit. - Two (2) Bottles - Range 0 - 20% - Note: This item is considered hazardous material and will ship ground service. Learn More
  22. Refill O2 Analyzer Fluid Kit
    Refill O2 Analyzer Fluid Kit
    Refill kit: O2 (Oxygen) Analyzer Fluid for your NU-3550 Fyrite Kit. - Two (2) Bottles - Range 0 - 21% - Note: This item is considered hazardous material and will ship ground service. Learn More
  23. Replacement Glove Port Band Clamp for PharmaGard CAI and CACI
    Replacement Glove Port Band Clamp for PharmaGard CAI and CACI

    16-inch Replacement Glove Port Band Clamp for PharmaGard CAI and CACI

    • Secures band and nitrile sleeve to glove port
    • For use with 8" round or 10" oval glove ports
    • All metal construction
    • Adjustable with a flat-head screwdriver
    Learn More
  24. Replacement Glove Port Band for PharmaGard CAI and CACI (10" Oval Glove Port)
    Replacement Glove Port Band for PharmaGard CAI and CACI (10" Oval Glove Port)

    Replacement Band for 10" Diameter Oval Glove Port
    Fits between outer nitrile sleeve and band clamp

    Compatible

    • PharmaGard PR797 Series 2 or Higher
    • PharmaGard NR797 Series 2 or Higher
    • PharmaGard NTE797 Series 1 or Higher
    Learn More
  25. Replacement Glove Port Band for PharmaGard CAI and CACI (8" Round Glove Port)
    Replacement Glove Port Band for PharmaGard CAI and CACI (8" Round Glove Port)

    Replacement Band for 8" Diameter Round Glove Port
    Fits between outer nitrile sleeve and band clamp

    Compatible

    • PharmaGard PR797 Series 1 or Lower
    • PharmaGard NR797 Series 1 or Lower
    Learn More

51-75 of 86

per page