Parts

NuAire started manufacturing laboratory equipment back in 1971. If you can believe it, some of those products are still in use today! If possible, we try to service and maintain these products. Can you image the changes products have gone through over 40 years of time? Since we have to match your product to a particular range of replacement parts, at the moment the only way to accurately match replacement parts to your product is through a manual process (Note: we have plans to digitize the process and create a better experience for you). It might take a little longer, but we want to ensure we offer the correct part to get you back up and running. The products below are some of the most popular parts that are purchased on a routine basis. If you do not see your part in the list below or would like to bypass the search process, please request a part by clicking on the button below. Thank you for your patience and understanding.

Request a Part

76-84 of 84

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Sensor Bay Capsule Filter
    Sensor Bay Capsule Filter
    Replacement capsule filter located in CO2 incubator sensor bay. Learn More
  2. Short Nitrile Replacement Sleeves for PharmaGard CAI and CACI (10" Oval Glove Port)
    Short Nitrile Replacement Sleeves for PharmaGard CAI and CACI  (10" Oval Glove Port)

    Short Replacement sleeves for PharmaGard Compounding Aspetic and Containment Isolators with 10" Oval Glove Port

    • Flexible and shows outstanding tensile and compression stress qualities
    • Strong resistance to most aromatic hydrocarbons, petroleum solvents, oils, fats, acids, and greases
    • Recommended for ethanol, gasoline, hexane, isopropanol, turpentine, and xylene
    • Not prone to induce allergic reactions
    • Dissipates electrostatic charge
    • Resists puncture and offers excellent abrasion protection
    • Set of 2
    • Recommended Replacement: Every Six Months

    Compatible

    • PharmaGard PR797 Series 2 or Higher
    • PharmaGard NR797 Series 2 or Higher - PharmaGard NTE Series 1 or Higher
    Learn More
  3. Stacking Rack Single
    Stacking Rack Single

    The Incubator Stacking Rack allows the ability to stack AutoFlow CO2 Water Jacketed Incubator models NU-8500. The Stacking rack may also be used with other AutoFlow model to raise the unit providing additional storage underneath. The stand is constructed of welded 2" cold-rolled tubular steel with baked powder coat paint finish. Leg Levelers provide final adjustment.

    Dimensions (w x d x h)
    33 x 30 x 45 7/8 in. (838 x 762 x 1165 mm)

    Learn More
  4. Stainless Steel CO2 Incubator Shelf and Guide Brackets (AutoFlow Series)
    Stainless Steel CO2 Incubator Shelf and Guide Brackets (AutoFlow Series)

    Additional Stainless Steel Shelf and Guide Brackets for AutoFlow Series CO2 Incubator.

    Learn More
  5. Stainless Steel Incubator Shelf and Guide Brackets (In-VitroCell ES Series)
    Stainless Steel Incubator Shelf and Guide Brackets (In-VitroCell ES Series)

    Additional Shelf and Guide Brackets for In-VitroCell ES CO2 Incubator.

    Learn More
  6. StripSpin adapter for 0.2ml tubes
    StripSpin adapter for 0.2ml tubes
  7. Swing-Out Rotor 4x250 ml
    Centrifuge Part/Accessory - Swing-Out Rotor 4x250 ml

    Part number NU-RX250 is a swing out for round buckets NU-B500.

    Learn More
  8. Wet In-Line Filter
    Wet In-Line Filter
    Wet In-Line Filter Replacement. Learn More
  9. Yellow Chemotherapy Sharps Container
    Yellow Chemotherapy Sharps Container

    Chemotherapy Sharps Collectors feature a wide entry port design for disposal of bulky chemotherapy waste. In addition, these collectors are designed to offer increased leak resistance.

    Learn More

76-84 of 84

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4