Biological Safety Cabinets 
Laminar Airflow Workstations 
CO2 Incubators 
Centrifuges 
Ultralow Freezers 
Pharmacy Isolators 
Animal Transfer Stations 
Fume Hoods 
Casework 
Accessories 
Parts 
Containment Ventilated Enclosures 
Custom Products 
NuAire started manufacturing laboratory equipment back in 1971. If you can believe it, some of those products are still in use today! If possible, we try to service and maintain these products. Can you image the changes products have gone through over 40 years of time? Since we have to match your product to a particular range of replacement parts, at the moment the only way to accurately match replacement parts to your product is through a manual process (Note: we have plans to digitize the process and create a better experience for you). It might take a little longer, but we want to ensure we offer the correct part to get you back up and running. The products below are some of the most popular parts that are purchased on a routine basis. If you do not see your part in the list below or would like to bypass the search process, please request a part by clicking on the button below. Thank you for your patience and understanding.
-
CuVerro
Additional CuVerro® Antimicrobial Copper Shelf and Guide Brackets for AutoFlow Series CO2 Incubator.
Learn More$260.00Request Service -
CuVerro
Additional CuVerro® Antimicrobial Copper Shelf and Guide Brackets for In-VitroCell ES CO2 Incubator.
Learn More$260.00Request Service -
Dry In-Line Filter
Dry In-Line Filter Replacement for CO2 and Air Inlet. Filters contaminated laboratory air or gas before entering the incubator growth chamber.
Learn More$25.00Request Service -
Incubator Shelf (PureCell Series)
Add to your existing PureCell NU-5100 CO2 Incubator system with an additional shelf.
Learn More
- 100% Stainless Steel Construction
- Electro Polished
- 16¼ x 18 in. (413 x 457 mm)
- Side Mount Bars Included
- PureCell NU-5100 Direct Heat model 16 Shelves Maximum$80.00Request Service -
Large Wet Capsule Filter
Large Wet Capsule 0.3 Micron HEPA Filter Replacement for Water-jacket CO2 Incubators. Filters chamber air before entering sampling by IR sensor. - Models NU-4750, 4850, 4950, 8500, 8700 Learn More$140.00Request Service -
Mobile Platform with Leg Leveling Casters and Mounting Brackets for CO2 Incubators
This accessory makes the incubator mobile for lab reorganization or cleaning. It is equipped with smooth-rolling casters that have built in leg levelers to add versatility in leveling and securing the equipment from moving during normal use. Learn More$425.00Request Service -
Refill O2 Analyzer Fluid Kit
Refill kit: O2 (Oxygen) Analyzer Fluid for your NU-3550 Fyrite Kit. - Two (2) Bottles - Range 0 - 21% - Note: This item is considered hazardous material and will ship ground service. Learn More$265.00Request Service -
Sensor Bay Capsule Filter
Replacement capsule filter located in CO2 incubator sensor bay. Learn More$145.00Request Service -
Stacking Rack Single
The Incubator Stacking Rack allows the ability to stack AutoFlow CO2 Water Jacketed Incubator models NU-8500. The Stacking rack may also be used with other AutoFlow model to raise the unit providing additional storage underneath. The stand is constructed of welded 2" cold-rolled tubular steel with baked powder coat paint finish. Leg Levelers provide final adjustment.
Learn More
Dimensions (w x d x h)
33 x 30 x 45 7/8 in. (838 x 762 x 1165 mm)$315.00Request Service -
Stainless Steel CO2 Incubator Shelf and Guide Brackets (AutoFlow Series)
Additional Stainless Steel Shelf and Guide Brackets for AutoFlow Series CO2 Incubator.
Learn More$145.00Request Service -
Stainless Steel Incubator Shelf and Guide Brackets (In-VitroCell ES Series)
Additional Shelf and Guide Brackets for In-VitroCell ES CO2 Incubator.
Learn More$145.00Request Service -
Wet In-Line Filter
Wet In-Line Filter Replacement. Learn More$25.00Request Service
