Service Training
Hands-on factory training for NuAire service partners and technicians.
What is NuAire lab equipment service training?
NuAire lab equipment service training is a hands-on, factory-led program that teaches service partners and field technicians how to install, troubleshoot, and maintain NuAire biosafety cabinets, CO2 incubators, ultralow freezers, and laminar airflow systems with confidence and in alignment with current standards.
What you can expect
- Small-group, instructor-led sessions at NuAire’s Plymouth, Minnesota training facility.
- Structured mix of classroom theory, live diagnostics, and hands-on lab exercises.
- Focused practice on real NuAire equipment and current production models.
- Guidance tailored for authorized service partners, certifiers, and in-house maintenance teams.
Class sizes are limited to protect the hands-on experience. If current sessions are full, you can still join the waitlist using the form below.
Factory Training for NuAire Service Partners and Technicians
NuAire’s service training program is designed specifically for field service technicians, certifiers, and service partners who support NuAire equipment in biomedical, clinical, pharmaceutical, and research laboratories.
Training takes place at our Plymouth, Minnesota facility and combines classroom instruction with live, hands-on exercises using NuAire biosafety cabinets, CO2 incubators, ultralow freezers, and laminar airflow workstations.
Who should attend?
- Authorized NuAire service partners and distributor service teams.
- Independent certifiers and biosafety cabinet field service organizations.
- In-house hospital, vivarium, and research facility maintenance teams.
- New technicians who need structured onboarding on NuAire equipment.
What you will learn
- How NuAire biosafety cabinets, CO2 incubators, and ultralow freezers are designed and controlled.
- Installation best practices, including placement, utilities, and startup considerations.
- Preventive maintenance procedures and recommended service intervals.
- Diagnostic workflows for common alarms, performance issues, and component failures.
- How to communicate findings and recommendations clearly to your customers or internal stakeholders.
Available course types
- Basic Biosafety Cabinet Service Training – Fundamentals of Class II BSC operation, airflow, controls, and routine service.
- Advanced Biosafety Cabinet Service Training – Deeper troubleshooting, complex diagnostics, and advanced field scenarios.
- CO2 Incubator Service Training – Installation, calibration concepts, and troubleshooting for NuAire incubators.
Each course combines lectures, demonstration, and hands-on lab time with opportunities for open discussion of real-world service situations.
2026 Service Training Class Schedule
NuAire service training classes are offered several times during the year to support our global service partner community. Each session follows the same three-day format: two days focused on airflow products (biosafety cabinets and laminar airflow systems) followed by one day dedicated to CO2 incubators.
| Month | Dates (2026) | Training Focus | Details |
|---|---|---|---|
| March | March 17–19 | Airflow Products + Incubators | 2 days Biological Safety Cabinet & laminar airflow service training, 1 day incubator service training. |
| June | June 16–18 | Airflow Products + Incubators | 2 days Biological Safety Cabinet & laminar airflow service training, 1 day incubator service training. |
| September | September 15–17 | Airflow Products + Incubators | 2 days Biological Safety Cabinet & laminar airflow service training, 1 day incubator service training. |
Class times: 8:00 a.m. – 4:00 p.m. each day, at NuAire’s training facility, 2915 Niagara Lane N, Plymouth, MN 55447, USA.
Class size: Enrollment is limited to maintain a highly interactive, hands-on experience. We encourage early registration, as classes often fill quickly.
Tuition, Registration & Logistics
Tuition and payment
Training fees are currently $250 per training day, per person (for example, $500 for the two-day Biological Safety Cabinet class and $250 for the one-day incubator service class).
Tuition payment may be made by credit card or check. To secure your seat, payment must be received within ten days after NuAire confirms your registration.
Cancellation and rescheduling policy
If you cancel your reservation less than fourteen days before class, there is no refund. If you decide to move to a later class less than fourteen days before your original session, fifty percent (50%) of your tuition can be transferred to a later class (up to six months out); the remaining fifty percent is due at the time you make the change.
What to expect in class
- Comprehensive, hands-on training on NuAire biosafety cabinets, airflow products, and incubators.
- Coursework covering basic operation, advanced biosafety calibration and maintenance, and incubator operation.
- Manuals and study materials provided by NuAire for you to keep.
- Small-group format designed for active participation and real-world troubleshooting.
Travel planning
Classes are held at our training building at 2915 Niagara Lane N, Plymouth, MN 55447. If you are staying at Home2 Suites by Hilton Plymouth, NuAire can arrange transportation to and from class—just let us know when you register.
International students should apply for a visa far enough in advance to ensure arrival in time for class.
How to register
- Complete the Service Training Class Request form on this page to indicate interest and preferred dates.
- NuAire will confirm availability and send you the latest registration and payment instructions.
- Submit your completed registration form and tuition payment within ten days of confirmation to secure your seat.
Service Training FAQs
What does the NuAire service training program cover?
NuAire service training includes hands-on instruction for airflow products (biosafety cabinets, laminar airflow systems) and CO₂ incubators. Courses cover operation, installation, calibration concepts, performance testing, troubleshooting, and routine maintenance.
Who should attend NuAire service training?
Training is designed for NuAire service partners, independent certifiers, field service technicians, and in-house maintenance teams responsible for supporting NuAire equipment in research, healthcare, and pharmaceutical environments.
Where are the classes held?
All courses take place at NuAire’s training center, 2915 Niagara Lane N, Plymouth, MN 55447, USA. Transportation can be arranged from Home2 Suites Plymouth if you stay there.
How long is each training session?
Each session runs for three days:
- Days 1–2: Airflow products (biosafety cabinets, laminar airflow)
- Day 3: CO₂ incubators
What is the cost of NuAire service training?
Training is billed at $250 per training day, per person.
A full three-day session totals $750 per participant.
Payment must be received within ten days of registration confirmation.
How do I register for a NuAire class?
Submit the Service Training Class Request form on this page.
NuAire will follow up with dates, materials, and a registration link or form.
Your seat is reserved once tuition is received.
What are the NuAire service training dates for 2026?
For 2026, NuAire will offer three standard service training sessions in Plymouth, Minnesota: March 17–19, June 16–18, and September 15–17. Each session includes two days focused on airflow products (biosafety cabinets and laminar airflow systems) and one day focused on CO2 incubators.
Service Training Class Request
Interested in attending a service training class? Fill out the form to request class details, availability, and more.